Sell a 400–499 Ton Chiller
We consider chillers rated 400 to 499 tons and handle the agreed removal and freight throughout South Carolina.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a 400–499 Ton Chiller in South Carolina
South Carolina Chiller Buyers purchases used chillers directly from owners and authorized site representatives. If you have a 400–499 ton chiller to sell, we can review its equipment details and removal conditions and provide an offer for consideration. We buy equipment; we do not sell replacement chillers.
Machines in this capacity range can be part of a larger cooling arrangement, so a sale may need to account for equipment that must remain in service. You do not need to decide how to disconnect or rig the chiller. Give us a clear picture of the unit and the surrounding access, and our team can evaluate the proposed removal with you.
Confirm What the Tonnage Refers To
If the nameplate lists a capacity from 400 to 499 tons, send a readable photograph of the entire label. Include the manufacturer and, if known, the compressor and condenser type. Please also say whether the capacity comes from the actual unit’s nameplate, a drawing, or an estimate. That distinction helps avoid treating a system-level figure or an old document as the rating of the chiller being offered.
Capacity is not the same as transport weight. The tonnage describes cooling capacity; it does not tell us the machine’s shipping weight, dimensions, or rigging requirements. If you have a manual, equipment schedule, or other records with those details, they can help with review, but do not handle or open equipment to find missing information.
Describe the Chiller and Its Condition
Share the information you already have about the unit, such as its age, model, operating history, known faults, and whether it is currently in use. A chiller does not have to be running or ready for a demonstration to request an offer. You do not need to start, test, repair, drain, or prepare it. If its condition is uncertain, state that plainly rather than guessing.
We consider chillers of all tonnages, including units below 20 tons; 20 to 2,000-plus tons is a common range. We also consider all brands and refrigerants. A less familiar brand, an older refrigerant, or a machine that has been idle is not by itself a reason to withhold the details.
Plan Around Equipment That Must Stay Active
If another chiller or a shared system needs to remain active, identify that constraint when requesting an offer. Explain which equipment must stay in place and whether common piping, electrical routes, or controls appear to connect the units. For example, if a plant has two chillers but only one is being sold, the buyer will need to understand which machine is intended for removal and what access is available without disturbing the other. This is an illustrative scenario, not a claim about any particular South Carolina site.
Do not assume that equipment can be isolated or separated based only on a visual check. Leave engineering, sequencing, and rigging decisions to the buyer’s team. A site representative can help clarify the intended scope and coordinate with the appropriate personnel without attempting to disconnect anything.
Make Access Conditions Clear
For a large machine, an accurate equipment inventory and a useful description of the route out can make the review more practical. Mention nearby columns, fixed piping, low or narrow doors, overhead obstructions, and any other visible constraints. Photos of the chiller and the relevant access path can help, provided they can be taken safely from an accessible area.
Capacity alone cannot establish whether a machine can pass through a doorway or be lifted from its location. The buyer’s team evaluates removal requirements and plans the necessary disconnects and rigging. The authorized owner or site representative must still give permission for the work and coordinate site access.
How Purchase and Removal Work
Once a purchase is agreed, South Carolina Chiller Buyers handles the removal arrangements, including disconnects, necessary refrigerant recovery by appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to hire a carrier or ship the chiller.
Refrigerant and process fluid are different. Refrigerant is part of the chiller’s cooling circuit; process or system fluid may be in connected piping or other parts of the installation. Do not vent, drain, cut, or dismantle equipment or connected services. Share what is known and leave required handling to the appropriate personnel.
What to Send for an Offer
A concise, accurate summary is more useful than an unverified description. You can include:
- Nameplate photo and the source of the stated 400–499 ton capacity
- Manufacturer, model, compressor or condenser type, and known refrigerant
- Known condition, current status, and whether another chiller must remain active
- Visible access constraints and the name or role of the authorized site contact
Payment is upfront. The offer and removal schedule depend on the equipment details, site conditions, and the terms agreed between the parties. Sending information does not commit you to a sale; it gives us a basis to review your 400–499 ton chiller in South Carolina and discuss a possible purchase.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.