Sell a 100–149 Ton Chiller
We consider chillers rated 100 to 149 tons and handle the agreed removal and freight throughout South Carolina.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a 100–149 Ton Chiller in South Carolina
South Carolina Chiller Buyers purchases used chillers; we do not sell replacement equipment. If you own a 100–149 ton chiller that is inactive and its service history is incomplete, you can request an offer without first proving that it runs. We consider all brands and refrigerants, and we also review units outside this tonnage range, including equipment under 20 tons and machines above 2,000 tons.
For an initial review, share what you can verify and distinguish it from what is uncertain. A missing maintenance file or unknown operating condition does not by itself prevent a conversation. The equipment, available information, site access and agreed removal arrangements all factor into the offer and schedule; neither a particular price nor a removal date can be promised in advance.
Start with the nameplate, not a guess
If the nameplate appears to show a rating from 100 to 149 tons, send a clear photograph of the entire label. Include the manufacturer and compressor or condenser type if known. State whether the capacity comes from the unit’s actual nameplate, a drawing, or an estimate. Those sources are not interchangeable: a drawing may describe a design or project, while an estimate may not reflect the installed machine.
Do not try to make an unreadable label easier to capture by opening a panel or moving equipment. Use an existing, safely accessible view, and report any uncertainty rather than filling in missing details. A broad photograph of the chiller can help relate the label to the machine being considered.
Describe condition without restarting the machine
For an inactive unit, useful information includes when it was last known to operate, why it was taken out of service if known, and whether records mention a fault, leak, major repair, or planned shutdown. If the reason is unclear, say so. Do not energize, start, open, drain, vent, cut, or dismantle the chiller to gather information or prepare it for an offer.
Separate documented facts from observations and assumptions. For example, a record that says “compressor fault” is more useful when identified as a service note than when presented as a confirmed diagnosis. If there are no records, simply explain that the service history is uncertain. Sellers do not need to test, repair, or prepare the equipment before requesting an offer.
Give the site picture as well as the tonnage
For a unit in this range, note whether it sits indoors, outdoors, or above grade. Doors, roof edges, turns along the removal route, overhead clearance, and truck staging space may affect the removal method independently of rated cooling capacity. A chiller’s tonnage describes cooling capacity; it does not tell a rigger how heavy the equipment is or whether it can pass through a particular opening.
If known, provide approximate dimensions, existing access restrictions, and whether the unit is on a roof, mezzanine, or other elevated location. These details are for planning, not a request for you to measure in a hazardous area or move anything. A clear description and ordinary site photographs from safe locations can help identify questions to resolve before an agreed removal.
Distinguish the chiller from connected systems
A chiller may be part of a larger cooling installation, but the equipment being offered should be identified as clearly as possible. The refrigerant inside the chiller is different from process fluid or water circulating through connected piping. Do not drain, vent, disconnect, or handle either system to clarify what is present. If you know the refrigerant from a label or existing record, include that information; all refrigerants are considered.
If the unit is still connected to site services or surrounded by other equipment, describe that arrangement. Avoid assuming that every adjacent pump, tower, tank, or pipe is included in the sale. The scope can be clarified before removal based on what the owner intends to sell and what the buyer agrees to purchase.
Information that can move an initial review forward
- Whole-label photograph and the source of the stated capacity
- Manufacturer, compressor or condenser type, and known refrigerant
- Last known operating status and any available service records
- Indoor, outdoor, or elevated placement and visible access constraints
- Confirmation that you are the authorized owner or site representative
Agree on responsibility before removal
Payment is upfront after the purchase terms are agreed. The authorized owner or site representative must provide permission and coordinate access, including any site-specific arrangements needed for the work. After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered; the seller does not need to arrange shipment or hire a carrier.
For a 100–149 ton chiller with an uncertain history, an accurate account of what is known—and what is not—is the practical starting point. Once the equipment and access details are reviewed, the purchase offer and removal schedule can be discussed and agreed without asking you to restart or dismantle the machine.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.