BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Chiller cooling capacity

Sell a 20–49 Ton Chiller

We consider chillers rated 20 to 49 tons and handle the agreed removal and freight throughout South Carolina.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a 20–49 Ton Chiller in South Carolina

South Carolina Chiller Buyers purchases used chillers; we do not sell replacement equipment. If you own a 20–49 ton chiller, you can request an offer whether it is operating, idle, or awaiting a larger site decision. We consider all brands and refrigerants, including units with incomplete records. A request does not require you to test, start, repair, or prepare the chiller.

Capacity is a useful starting point, not a complete description of the equipment. We also consider its configuration, condition, refrigerant information, location, and removal requirements. Any offer and removal schedule depend on the particular unit and the purchase agreement, so neither a price nor a date can be determined from tonnage alone.

Establish What the Label Actually Says

If the nameplate appears to show a rating from 20 to 49 tons, send a clear photograph of the entire label. Include the manufacturer and, if known, the compressor or condenser type. Tell us whether the capacity comes from the chiller’s actual nameplate, a drawing, or an estimate. That distinction matters when an old label is hard to read or paperwork describes a system rather than the unit being sold.

Do not guess at faded characters or convert another rating into tonnage without noting that you are estimating. If the label gives a different unit of measurement, provide a photograph and the wording as printed; we can review the information rather than treating an uncertain conversion as confirmed capacity. A legible label helps identify the machine, but it does not by itself establish operating condition or removal weight.

Keep Retrofit History Separate from Original Details

Older chillers may have records from later service or retrofit work. If available, share documents that identify the original model, replaced components, refrigerant changes, or other modifications. Describe what each record appears to cover and whether it refers to this specific chiller. A retrofit note may describe a refrigerant change without changing the unit’s original nameplate capacity.

When records conflict, flag the mismatch rather than choosing the figure that seems most likely. For example, if a drawing lists one capacity but the label is worn and a later service record names another refrigerant, send the documents and explain what you know. We consider all refrigerants, but accurate identification helps us assess the asset and plan appropriate handling. Do not open the equipment or inspect refrigerant lines to fill gaps in the paperwork.

Show the Package and the Removal Route

Compact chillers can still be difficult to remove. A unit may sit on a pad, platform, or roof and have electrical or piping connections that complicate access. A photograph of the complete package, together with the surrounding path, is more useful than assuming a smaller machine can simply be rolled away. If you can safely take exterior photos from an authorized area, include the route toward the loading point and note visible stairs, doors, overhead limits, or restricted access.

Capacity is not transport weight. Two chillers with similar tonnage may differ in dimensions, construction, mounted accessories, and lifting needs. Do not estimate weight from tonnage or attempt to move the unit to demonstrate that it is accessible. If a weight appears on a nameplate, drawing, or other record, share the source and indicate whether it describes the complete package or only a component.

Distinguish Refrigerant from Process Fluid

Chiller records may refer to refrigerant on one hand and water or another process fluid on the other. These are not interchangeable descriptions: refrigerant is part of the refrigeration circuit, while process fluid circulates through the connected system. If a record uses an unfamiliar term, send the wording as written instead of inferring which circuit it describes. Do not drain, vent, cut, or dismantle anything to identify it.

Useful Information for a First Review

  • A full nameplate photograph, plus the source of any stated capacity that is not plainly readable.
  • Manufacturer, model, and compressor or condenser type, if known.
  • Available records of retrofits, refrigerant changes, or component replacement, with uncertainties noted.
  • Photos of the complete chiller and surrounding access route, along with known placement or access limits.

Purchase and Removal Responsibilities

After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight; freight is covered. The authorized owner or site representative must still give permission and coordinate access. Do not arrange shipment or hire a separate crew to prepare the chiller as a condition of requesting an offer. Payment is upfront, with the transaction and removal timing based on the agreed terms and the equipment’s circumstances.

Make a Request Without Preparing the Unit

If the chiller is idle, enclosed, or difficult to reach, say so when you provide its details. For example, if the label is incomplete and the machine is on a roof, the label photo, any available retrofit record, and an exterior view of the access route can help describe the situation without starting or altering the equipment. Send what you can verify, identify what remains uncertain, and let the review account for those limits. You do not need to restore the unit or claim a precise capacity before asking about a sale.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote