BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Chiller manufacturer

Sell a Used Dunham-Busch Chiller

We buy used and surplus Dunham-Busch chillers in South Carolina, with buyer-managed removal and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Used Dunham-Busch Chiller in South Carolina

South Carolina Chiller Buyers purchases used Dunham-Busch chillers directly from authorized owners and site representatives. We consider equipment across all tonnages, from units below 20 tons to larger systems; 20 to 2,000-plus tons is a common range. We buy all brands and refrigerants, and we do not sell replacement equipment.

If you are assessing your Dunham-Busch chiller for removal, start with what can be confirmed from its identification plate and records. The brand alone does not establish the compressor design, cooling method, capacity, refrigerant, or present condition. Accurate details help us review the equipment without asking you to make assumptions or prepare it for operation.

Read the Equipment Plate, Not Just the Old Label

Chillers can remain in service after labels fade, controls change, or components are replaced. Locate the manufacturer’s equipment plate if it is safely visible, and share a clear photograph or transcribe the information you can read. Useful details may include the model and serial numbers, stated capacity, refrigerant, and other listed ratings. If a field is illegible or the plate is missing, say so rather than filling in a likely value.

Dunham-Busch has produced chillers in different configurations, including screw-compressor designs. That history is not enough to identify the design of an individual unit. Use the model information and visible equipment to describe it; do not infer compressor type or cooling method from the brand name alone. If the machine’s configuration is uncertain, our review can take that uncertainty into account.

Photographs That Help With an As-Is Review

Provide photographs only from safe, accessible viewpoints. A useful set can show the overall chiller, the identification plate, the compressor area, controls, condenser or shell, and any separate starter associated with the unit. Include enough context to distinguish the chiller from adjacent equipment, but do not remove covers or enter restricted areas to get a better image.

Share known retrofit or condition information alongside the pictures. For example, if records indicate that a control panel or compressor was changed, note the work and its approximate timing if known. If the records are incomplete, make that clear. The unit can be reviewed as-is: you do not need to test or start it, repair it, or make it ready for an offer.

Keep Capacity Separate From Removal Weight

Capacity, usually stated in tons of cooling, describes the chiller’s cooling rating; it is not the unit’s transport weight. A large-capacity machine may require a different removal plan than a smaller unit, but capacity alone cannot establish rigging needs. Physical dimensions, construction, configuration, access, and available handling space also matter. If a weight is listed on a plate or drawing, share it as recorded; do not estimate one from tonnage.

It is also useful to distinguish refrigerant inside the chiller from process fluid that may circulate through a connected system. Do not open, drain, vent, cut, or dismantle equipment to determine what remains in either circuit. Tell us what you know from existing records, and leave any necessary refrigerant recovery to appropriately qualified personnel as part of the agreed removal.

Records and Access Information to Gather

Before requesting an offer, collect information you already have and can share without operating or altering the chiller. A practical starting set is:

  • Readable equipment-plate details, or a note that the plate is absent or unclear.
  • Photos of the chiller, compressor area, controls, condenser or shell, and separate starter, if present and safely visible.
  • Known retrofit, service, refrigerant, or condition records, with uncertainties identified.
  • The site location, the authorized owner or representative, and a description of access constraints relevant to removal.

These details are more useful than a guessed model description or an unsupported claim that a machine is operational. If information is unavailable, provide what you can; the review and any follow-up depend on the equipment and the proposed agreement.

What Happens After an Agreed Purchase

Payment is upfront under the agreed purchase terms. Once the purchase is agreed, South Carolina Chiller Buyers handles the removal work, including disconnects, necessary refrigerant recovery by appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to arrange transport or ship the chiller.

The authorized owner or site representative must still provide permission for the transaction and coordinate site access. For instance, if a unit is in a restricted mechanical area, the representative may need to arrange entry and explain relevant site procedures. That is coordination, not a request for the seller to disconnect or prepare the equipment.

Offer and Schedule Depend on the Equipment

An offer and removal schedule depend on the chiller’s identified details, condition information, configuration, access, and the terms both parties agree to. A clear plate photo and honest notes about old labels or possible retrofits can help establish what is known, but they do not guarantee a particular price or date. Share the confirmed facts, flag what remains uncertain, and request an as-is review of your Dunham-Busch chiller in South Carolina.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote