Sell Your Used Packaged Chiller
We buy surplus packaged chiller equipment throughout South Carolina and manage the agreed removal.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell Your Used Packaged Chiller in South Carolina
South Carolina Chiller Buyers purchases used packaged chillers directly from their owners. We buy equipment; we do not sell replacement chillers. Whether your unit is surplus, scheduled for removal, or part of a larger equipment change, you can request an offer without first making it operational or freight-ready.
We consider all tonnages, including units below 20 tons. Chillers from 20 to 2,000 tons and above are also common inquiries. We consider all brands and refrigerants, so an unusual capacity, manufacturer, or refrigerant is not by itself a reason to rule out your equipment. An offer and removal schedule depend on the specific unit and the terms agreed with you.
Identify Each Chiller in a Multi-Unit Facility
If a facility has several similar chillers, describe the particular packaged chiller you want to sell rather than relying on a general equipment-room description. A nameplate photo or a written record of the manufacturer, model, serial number, and rated capacity can help distinguish one unit from another. If the nameplate is difficult to read, share what information is safely visible; do not open or energize equipment to find details.
Use consistent labels in your notes or photos, such as “north unit” or an existing site asset number, and connect each label to the corresponding model and serial number where possible. If multiple units have similar specifications, clarify which one is included in the proposed sale and whether other chillers are excluded. This avoids confusing the purchased asset with equipment that will remain at the site.
Describe the Whole Package, Not Just the Chiller
A packaged chiller brings major components together in one assembly, but the actual configuration varies by model. Tell us what is included and identify anything associated with the unit that is separate or located elsewhere. For example, a remote condenser, starter, pump, or control enclosure may be part of the system without being mounted in the same assembly. Clear descriptions help establish what is actually being offered.
Also note visible skids, brackets, or lifting points and whether the unit is assembled, disconnected, or already staged for shipment. You do not need to dismantle the chiller, prepare it for freight, or move it to a loading area. These details help assess access and handling while leaving the work to the buyer after an agreed purchase.
Capacity Is Not a Shipping Weight
Rated tonnage describes cooling capacity; it does not tell you how much the equipment weighs or how it can be transported. Two chillers with similar capacity can differ in dimensions, configuration, and lifting requirements. If a weight or shipping dimension is available in existing records, it can be useful, but do not estimate by tonnage alone or attempt to verify weight by moving the equipment.
For instance, if two similar packaged chillers have different skids or attached components, the larger or heavier-looking assembly may need different rigging even if their rated capacities are close. That is a conditional handling consideration, not a conclusion based on capacity alone. Existing drawings, equipment schedules, and safe-access photos can help explain the difference.
Process Fluid and Refrigerant Are Different
A chiller’s process fluid, commonly water or a water-based solution, circulates through the cooling system; refrigerant operates within the refrigeration circuit. When describing a unit, report known information about each separately rather than treating the fluids as interchangeable. You do not need to drain either circuit, vent refrigerant, or open the equipment to request an offer.
We consider chillers using all refrigerants. If the refrigerant type is known from existing records or safely visible labeling, include it; if it is unknown, say so. Refrigerant recovery, if necessary, is handled after an agreed purchase by appropriately qualified personnel. Do not release refrigerant or ask unqualified staff to handle it.
What to Share When Requesting an Offer
Useful information can be gathered from existing records and observations made without disturbing the equipment. For a facility with multiple similar units, keep details tied to the correct asset so the offer discussion reflects the chiller you intend to sell.
- Manufacturer, model, serial number, and rated tonnage, if available
- Refrigerant type, if known, and the unit’s assembled or disconnected status
- Included or separate components, such as a remote condenser, starter, pump, or controls
- Skid, bracket, lifting-point, access, and staging details visible without moving the unit
You do not need to test, start, repair, or prepare your packaged chiller to request an offer. If it is not operating, state that plainly; do not energize it to confirm condition. A conditional example: if a unit is disconnected but still in its original location, note that status and describe the route or access constraints as known. The buyer can consider handling requirements when discussing the equipment and removal.
Purchase, Access, and Removal Arrangements
Payment is upfront after the purchase terms are agreed. South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight; freight is covered. You do not need to hire a carrier or ship the chiller yourself.
The authorized owner or site representative must provide permission and coordinate access, including any relevant site procedures and timing. For example, if a facility has several chillers in one room, the representative can identify the correct unit and explain access constraints before removal planning. The agreed equipment, access conditions, and schedule determine the removal plan; no particular price or date can be promised in advance. Contact South Carolina Chiller Buyers with the available details to discuss selling your used packaged chiller.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.