BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Centrifugal Chiller in Simpsonville, SC

We buy used centrifugal chiller equipment in Simpsonville and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Centrifugal Chiller in Simpsonville, SC

If you have a surplus centrifugal chiller in Simpsonville, South Carolina, South Carolina Chiller Buyers can consider purchasing it directly. We buy used chillers; we do not sell replacement equipment. A unit that is no longer needed may still be worth evaluating, including one in storage or one whose controller or starter has been removed and kept separately.

We consider chillers of all tonnages, including units below 20 tons. Capacities from 20 to 2,000+ tons are common, but size alone does not determine whether we can make an offer. We consider all brands and refrigerants. The unit’s identity, configuration, condition, access, and removal requirements all help shape the review.

Identify the complete centrifugal package

A centrifugal chiller uses an impeller-driven compressor. When requesting an offer, record the full unit model and the compressor and motor arrangement. Centrifugal packages that look alike from the outside can differ in controls, drive design, and internal condition, so a partial model number or a broad description may not be enough to distinguish them.

If the controller or starter is stored separately, note that clearly and identify what is present, what is detached, and where the separate components are located. If labels or records are available, share their information without opening or dismantling equipment. A missing component does not automatically settle the unit’s value or suitability; it is a detail for the buyer to assess with the rest of the package.

Document condition without starting the machine

You do not need to test, start, repair, or prepare your centrifugal chiller to request an offer. Do not energize the unit or open, drain, vent, cut, or dismantle it to gather information. Existing records, visible identification plates, and photographs can provide a useful starting point while leaving condition assessment and handling to the appropriate parties.

For a stored machine, describe its storage status and any known history or missing parts as accurately as you can. If the unit’s operating condition is unknown, say so rather than guessing. A clear account of uncertainty is more helpful than an unsupported claim that the chiller is operational or complete.

Photographs and access details that help

Photograph the shell ends, motor, starter or drive, and any visible lifting points. Include the separate controller or starter in its own photographs if it is not installed with the chiller. Also note whether the assembled package is indoors or outdoors and describe the route to the loading area as best you can.

Large assembled chillers may need careful clearance measurements. Do not assume that a package can leave through the same opening used by a technician to enter the room. Doorways, corridors, turns, overhead obstructions, and the path to a pickup position may affect the removal plan. Provide measurements or access observations only when they can be gathered safely without moving or altering the equipment.

Capacity is not transport weight

The chiller’s tonnage describes cooling capacity; it is not its transport weight. A high-capacity centrifugal unit may be heavy and difficult to move, while the actual removal requirements depend on the particular assembly, access route, and site conditions. Model information and available documentation can help establish what is being considered, but the removal plan must account for the physical package and its path out of the site.

Refrigerant and process fluid are also distinct. Refrigerant is part of the chiller’s refrigeration system, while process or chilled water is circulated through the equipment as part of the cooling application. Do not release or drain either substance to prepare the unit. If refrigerant recovery is needed after a purchase agreement, it is handled by appropriately qualified personnel as part of the buyer’s removal work.

From review to removal

Share the identifying details, known condition, component status, photographs, and access information to request an offer. Any offer and removal schedule depend on the equipment and the agreement reached; neither a particular price nor a specific date can be promised in advance. Payment is upfront under the agreed purchase terms.

After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The authorized owner or site representative still needs to grant permission and coordinate site access and timing.

A practical checklist before requesting an offer

  • Record the full unit model, compressor and motor arrangement, and known tonnage.
  • Note whether the controller, starter, or drive is installed, detached, or stored separately.
  • Photograph the shell ends, motor, starter or drive, lifting points, and any detached components.
  • Describe known condition, unknowns, and the route from the chiller to a loading area.

These details help distinguish your centrifugal chiller in Simpsonville from similar-looking equipment and give the buyer a practical basis for review. There is no need to make the machine operational or ready for shipment before asking whether it can be purchased.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote