Sell a Surplus Centrifugal Chiller in Mount Pleasant, SC
We buy used centrifugal chiller equipment in Mount Pleasant and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Centrifugal Chiller in Mount Pleasant, SC
If you have a surplus centrifugal chiller in Mount Pleasant, South Carolina, South Carolina Chiller Buyers may consider purchasing it. We are a direct buyer, not a seller of replacement equipment. We consider all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We also consider all brands and refrigerants. Whether your chiller is idle, part of a planned replacement, or no longer needed for the process it served, you can request an offer without first putting the machine into operating condition.
A centrifugal machine uses an impeller-driven compressor, but that description alone is not enough to identify a particular package. Two units that look alike from the outside may differ in controls, drive arrangement, or internal condition. Share the information available to you so the equipment and removal requirements can be reviewed before an agreement is reached.
Identify the Package Before Requesting an Offer
Record the full unit model and the compressor and motor arrangement, using existing labels or paperwork where available. Include the manufacturer, approximate capacity, and any known information about the starter or drive. If records are incomplete, say so rather than guessing. A partial but accurate description is more useful than an assumed specification.
Photographs can help distinguish the chiller configuration and show the condition of accessible exterior components. Useful views include the shell ends, motor, starter or drive, and any visible lifting points. Do not open panels, energize the unit, or disturb components to produce a better picture. Existing service documents, asset records, or photographs may supply details that are not safely visible from outside.
Capacity Is Not the Same as Removal Weight
Chiller capacity describes cooling output; it does not tell you how heavy the assembled equipment is or how it can be moved. A large package may need a specific crane and rigging plan, and its path out of the building can be more restrictive than its location suggests. Photographing visible lifting points and noting the unit’s position can help frame the removal discussion, but do not treat lifting points as verified rigging instructions.
Measure or obtain existing information about clearances along the proposed route, including doorways, overhead obstructions, and the space around the machine. Do not assume a package can pass through the opening used by a technician to enter the mechanical area. If the chiller is on a roof, roof access, crane positioning, and the path for lifting the load need consideration before a removal schedule can be set.
For a Rooftop Unit, Confirm Permission and Crane Access
For example, if your centrifugal chiller is on a rooftop and a crane may need to lift it over a building edge, first confirm that you are authorized to arrange work at the site. The owner or authorized site representative must permit the work and coordinate access. Depending on the property and the agreed removal plan, crane placement or access through controlled areas may also need advance coordination. These are planning considerations, not claims about any particular Mount Pleasant building.
Tell us what is known about roof access, the unit’s location, and any practical clearance constraints. Do not attempt to move the equipment or arrange shipment yourself. After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The offer and removal schedule depend on the equipment and the agreement; no specific price or date can be promised in advance.
Refrigerant and Process Fluid Are Different
A chiller may contain refrigerant in its refrigeration circuit and a separate process fluid or water circuit. These are not interchangeable, and the presence of one does not establish what is in the other. Share any known refrigerant information from records or labels, but do not vent, drain, or open the equipment to identify its contents. Necessary refrigerant recovery is handled as part of removal by appropriately qualified personnel after a purchase is agreed.
You do not need to test, start, repair, or prepare the chiller to request an offer. If the unit’s operating history or internal condition is uncertain, describe that uncertainty plainly. An offer is based on the equipment information and the terms agreed, rather than on a requirement that you make the machine operational.
Information That Helps Review Your Chiller
- Full unit model, manufacturer, and any available capacity or asset records.
- Compressor and motor arrangement, plus known starter or drive details.
- Exterior photographs of the shell ends, motor, starter or drive, and visible lifting points.
- Known access limits, approximate clearances, rooftop location, and crane considerations.
- Any available refrigerant or service documentation, without opening or disturbing the unit.
Agree on Scope Before Removal
Once the equipment and site details have been reviewed, confirm the purchase terms and removal scope with the buyer. The authorized owner or site representative remains responsible for granting permission and coordinating access, while the buyer handles the agreed removal work. This division helps avoid confusion about who is arranging disconnection, recovery, rigging, and freight.
Payment is upfront. If your surplus centrifugal chiller in Mount Pleasant is a rooftop package, an older unit with incomplete records, or a machine whose condition is unknown, you can still request an offer without commissioning repairs or arranging transport. Provide what you know, identify what remains uncertain, and allow the equipment and access details to guide the next steps.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.