BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Centrifugal Chiller in St. Stephen, SC

We buy used centrifugal chiller equipment in St. Stephen and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Centrifugal Chiller in St. Stephen, SC

South Carolina Chiller Buyers purchases surplus centrifugal chillers in St. Stephen and throughout South Carolina. We are a direct buyer, not a seller of replacement equipment. We consider units of all tonnages, including equipment below 20 tons; 20 to 2,000+ tons is a common range. We also consider all brands and refrigerants. An older machine, incomplete paperwork, or a unit that is no longer in service does not by itself rule out an offer.

For an initial review, share what you can verify about the chiller and its condition. You do not need to test, start, repair, or prepare the machine to request an offer. If you are unsure about a nameplate entry, refrigerant, or configuration, say so rather than filling in a guess. Accurate uncertainty is more useful than a confident detail that later proves wrong.

Identify the machine without relying on appearance

A centrifugal chiller uses an impeller-driven compressor, but packages that look alike can differ in important ways. Record the full unit model and, if visible, the compressor and motor arrangement. The controls, drive, and internal condition may vary even between similar-looking units, so a partial model number or a description based only on cabinet shape can leave key questions unanswered.

Labels on older equipment may be faded, damaged, or inconsistent with later changes. Photograph each readable plate and transcribe only the characters you can make out. If a label is illegible, note that rather than reconstructing a number from memory. An uncertain serial number or capacity should remain marked as uncertain until it can be confirmed from reliable records.

Separate original information from retrofit history

Chillers may have been modified during their working life. Available service files could include retrofit notes, control changes, drive information, refrigerant conversions, or replacement-component records. These documents can help distinguish the current configuration from the original factory description, but they should not be treated as proof unless they clearly identify this particular unit.

If records are available, provide the relevant pages or a concise summary and label what is documented versus what is remembered. Do not assume that an old refrigerant label reflects the current charge, or that a retrofit entry confirms every component was changed. South Carolina Chiller Buyers can review the information you supply and clarify what remains unknown as part of discussing the equipment.

Photographs and access details help assess removal

Useful images include the shell ends, motor, starter or drive, readable nameplates, and any visible lifting points. Take photographs from safe, accessible positions; do not open panels or approach energized components to obtain a better view. If a lifting point cannot be seen, simply note that it has not been verified.

A large assembled package may need careful clearance measurements. Consider the route from the chiller’s present position to the loading area, including doorways, overhead obstructions, turns, and the available working space. Do not assume the unit can pass through the same opening used by a technician. Measurements and photographs can inform planning, but they do not replace an assessment of the actual equipment and removal conditions.

Capacity is not a shipping weight

Cooling capacity, usually stated in tons, describes the chiller’s rated cooling output; it does not tell you how heavy the assembled unit is or whether it can be moved through a particular route. Transport weight and dimensions depend on the package and its configuration. If you have a weight from a drawing or equipment record, identify its source and whether it refers to the complete assembly or only a component. Do not infer a lifting weight from tonnage.

Likewise, refrigerant and process fluid are different things. Refrigerant belongs to the chiller’s refrigeration circuit; process or chilled-water fluid circulates through the connected system. Avoid estimating either quantity from the other. You do not need to drain or otherwise prepare the unit to request an offer.

What to send for a useful review

A brief, factual description is a good starting point. Include the site location in St. Stephen, the information you can read from the unit, its known operating or storage status, and any records that may explain changes. These details can help identify what should be reviewed without requiring you to investigate the machine or alter its condition.

  • Full unit model and any legible compressor, motor, starter, or drive details
  • Photographs of labels, shell ends, motor, starter or drive, and visible lifting points
  • Known retrofit records, current access constraints, and any uncertainties

Examples are conditional: if the original plate is unreadable but a service record identifies a later control change, share both and distinguish the record from what you can see now. If the chiller is intact but its removal route is unclear, provide available clearance information and flag the unknowns. Neither situation requires you to start or dismantle the equipment.

Purchase and removal arrangements

After the purchase terms are agreed, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The authorized owner or site representative must still provide permission and coordinate access to the equipment and site.

Payment is upfront. The offer and removal schedule depend on the chiller, the information available, access conditions, and the agreement reached; a specific price or date cannot be promised in advance. Share what is known, identify what is not, and let the equipment review guide the next discussion.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote