Sell a Surplus Water-Cooled Chiller in Hanahan, SC
We buy used water-cooled chiller equipment in Hanahan and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Water-Cooled Chiller in Hanahan, SC
If you have a surplus water-cooled chiller in Hanahan, South Carolina, South Carolina Chiller Buyers can consider it for purchase. We are a direct buyer, not a seller of replacement equipment. An inactive machine may still be worth evaluating even when its service history is incomplete, its operating condition is unknown, or the property no longer needs it. You do not need to start, test, repair, or prepare the chiller to request an offer.
Share what you know, identify what is uncertain, and clarify which surrounding equipment is included. The offer and removal schedule depend on the unit, site conditions, and agreed scope; neither a particular price nor a specific removal date can be promised in advance.
Map the Water and Equipment Boundaries
A water-cooled chiller normally connects to two separate water circuits: a chilled-water loop serving the cooling load and a condenser-water loop that carries heat away, often to a cooling tower. These are water connections, not refrigerant lines. The chiller also contains its own refrigeration system, so avoid treating the process water circuits and refrigerant as interchangeable when describing the equipment.
For an inactive unit with uncertain history, do not assume that every nearby pump, tower, valve, or control belongs to the sale. Note whether the cooling tower, pumps, and associated controls are included or will remain with the property. If shared piping or equipment still serves another system, flag that boundary for review rather than assuming it can be removed with the chiller.
Build a Useful Record Without Operating the Unit
Gather information from existing records and safe, accessible views. A nameplate photo can help identify manufacturer, model, serial number, and rated capacity. Prior invoices, maintenance notes, or shutdown records may clarify when the unit last ran, but an incomplete file is still useful if its gaps are stated plainly. Do not energize, open, drain, vent, cut, or dismantle equipment to gather details.
For water-cooled chiller removal, the disconnection plan must distinguish the chiller from shared piping and cooling equipment that stays in use. Photos showing accessible valves, insulation, pipe runs, nearby equipment, and the machinery-room exit can help establish the scope. Avoid moving insulation or entering restricted areas to get a better image; describe anything hidden or inaccessible instead.
Capacity Is Not the Same as Removal Weight
Chiller capacity is commonly expressed in tons of cooling, but that figure does not state how heavy the machine is or whether it can pass through the building’s exit. Transport planning may depend on the unit’s dimensions and weight, its position, overhead or door clearances, and the route from the machinery room to the loading area. Existing equipment records may list shipping or operating weight, but those figures should not be treated as a confirmed rigging plan without reviewing the actual removal conditions.
South Carolina Chiller Buyers considers chillers of all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We consider all brands and refrigerants. A small unit is not automatically outside the scope, and an unfamiliar refrigerant or unknown operating condition is a detail to disclose, not a reason to guess.
Clarify Access and What Remains on Site
Before an agreement, identify who is authorized to approve the sale and who can coordinate access at the property. The owner or authorized site representative must provide permission and arrange access, including any applicable site procedures or timing constraints. If the chiller shares piping, controls, or a cooling tower with equipment that remains operational, make that clear when discussing the removal boundary.
For example, if a facility has isolated the chiller but still uses a shared condenser-water loop, the removal plan may need to preserve that loop and its supporting equipment. If the service history is unknown and records do not establish whether the unit was fully disconnected, report that uncertainty; do not inspect internal components or attempt a restart to resolve it.
What Happens After an Agreed Purchase
Once a purchase is agreed, the buyer handles the removal work: disconnections, necessary refrigerant recovery by appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. Sellers do not need to hire a rigging contractor, ship the chiller, or take it apart before requesting an offer.
Removal still depends on the agreed scope and site access. The schedule is coordinated around the equipment and conditions rather than guaranteed from the first inquiry. Share known access restrictions, shared-system concerns, and any uncertainty about the machine’s isolation so the proposed work can be assessed against the actual situation.
Prepare a Clear Offer Request
A concise request can include the manufacturer and model if known, approximate capacity, the unit’s status, available service records, and whether the tower, pumps, and controls are included. Add safe-access photos of the chiller, visible water connections, surrounding equipment, and exit route. Separate confirmed details from estimates, especially for weight, condition, and what can be disconnected without affecting other systems.
- Identify the chiller and note what is known or unknown about its service history.
- Show the chilled-water and condenser-water connection areas from accessible locations.
- State which tower, pumps, controls, and piping remain or may be included.
- Describe the machinery-room exit, loading access, and any shared equipment constraints.
With those details, South Carolina Chiller Buyers can review your water-cooled chiller in Hanahan and discuss an offer. Payment is upfront for an agreed purchase, while the removal scope and timing are confirmed based on the equipment and the parties’ agreement.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.