Sell a Surplus Centrifugal Chiller in Hanahan, SC
We buy used centrifugal chiller equipment in Hanahan and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Centrifugal Chiller in Hanahan, SC
South Carolina Chiller Buyers purchases surplus centrifugal chillers in Hanahan and elsewhere in South Carolina. We are a direct buyer, not a seller of replacement equipment. We consider centrifugal chillers of all capacities, including units below 20 tons; 20 to 2,000+ tons is a common range, but nominal tonnage alone does not determine whether a machine is a fit for purchase.
If a chiller is no longer needed, is part of a planned replacement, or is taking up space ahead of a facility change, you can request an offer without first testing or preparing it. The equipment and the agreed removal conditions shape the offer and schedule, so neither a specific price nor a removal date can be assumed in advance.
Capacity and weight answer different questions
Nominal cooling tons describe a chiller’s rated cooling capacity, not how heavy it is or how difficult it will be to remove. Two centrifugal machines with similar stated capacity can have different shell dimensions, motor and compressor arrangements, accessories, and installed configurations. Conversely, a high-capacity unit is not automatically the heaviest package on a site.
Documented equipment weight is more useful for planning lifting and transport, but records may refer to different things: a dry or operating weight, the chiller alone, or a larger assembly with attached components. If the available figure is uncertain, identify it as such rather than treating a tonnage rating as a weight estimate. Do not climb onto, open, or dismantle the unit to find a label or measurement.
Identify the centrifugal package clearly
A centrifugal machine uses an impeller-driven compressor. When requesting an offer, record the full unit model and the compressor and motor arrangement if that information is readily available. Visually similar packages may differ substantially in controls, drive, and internal condition, so a broad description such as “large chiller” leaves important questions unanswered.
Useful details can include the manufacturer, model and serial number, approximate capacity, and any known operating or storage status. Photos of the shell ends, motor, starter or drive, and visible lifting points can help distinguish the equipment and its configuration. Share existing records or observations; you do not need to energize, open, drain, vent, cut, or dismantle the chiller to request an offer.
Show the route, not just the machine
Removal planning depends on access as well as the equipment itself. A large assembled package may need careful clearance measurements along the route to an exit. Do not assume it can pass through the same opening a technician uses to enter. If measurements are available, note door and corridor clearances, overhead restrictions, turns, and any known constraints around the planned lifting area.
Photographing available lifting points can provide useful context, but do not attach rigging or attempt to move the unit. Unit capacity does not reveal transport weight, and a photograph does not establish whether a route or lift is suitable. The buyer can consider the equipment and access information when discussing the proposed removal approach.
What happens after an agreed purchase
After the purchase is agreed, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. Sellers do not need to arrange shipment or hire a separate removal crew as part of this process.
The authorized owner or site representative still needs to give permission and coordinate access. That may include confirming when the area can be reached and communicating any site-specific entry or scheduling requirements. The removal plan and timing depend on the chiller, the route, access conditions, and the terms agreed for the purchase.
Refrigerant is not process fluid
A chiller may contain refrigerant within its refrigeration circuit and may also connect to a separate process or cooling-water circuit. These are not interchangeable fluids, and their presence does not establish the machine’s condition or the work needed for removal. Do not release, drain, or handle either system to prepare for an offer. If existing documentation identifies the refrigerant or records previous service, include that information when available; we consider chillers using all refrigerants.
Make a practical offer request
For your centrifugal chiller in Hanahan, provide the unit identity, any known capacity and documented weight, the compressor and motor arrangement, available condition information, and photographs of the package and access route. If a weight is missing or unclear, say so; a nominal tonnage is not a substitute. There is no need to test, start, repair, or otherwise prepare the unit before requesting an offer.
- Share the full model and any accessible nameplate information.
- Distinguish stated cooling tons from a documented equipment-weight figure.
- Include shell-end, motor, starter or drive, lifting-point, and route photos when safely available.
- Note access limits and identify the owner or site representative who can authorize and coordinate removal.
With those details, we can evaluate the surplus equipment and discuss an offer and removal plan based on the specific machine and agreed conditions.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.