Sell a Surplus Air-Cooled Chiller in Hanahan, SC
We buy used air-cooled chiller equipment in Hanahan and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Air-Cooled Chiller in Hanahan, SC
If you have an air-cooled chiller in Hanahan that is no longer needed, a clear inventory is a useful starting point for a purchase discussion. South Carolina Chiller Buyers buys used chillers directly; we do not sell replacement equipment. We consider surplus air-cooled units across all tonnages, including equipment below 20 tons. Units from 20 to 2,000+ tons are a common range, but capacity alone does not determine whether a unit is worth reviewing.
You do not need a complete equipment file to ask for an offer. Share the information you have, identify what is unknown, and add photographs where practical. Missing model data or an untested operating history does not mean you must start, repair, or prepare the chiller before requesting consideration.
Build the inventory from what is visible
Air-cooled chillers reject heat through outdoor coils and fans, rather than relying on a conventional cooling-tower loop. For an initial description, record the make and model if readable, approximate or documented cooling capacity, compressor count where visible, and the general condition of the fan assemblies and coils. Note whether the equipment is on a roof, a ground-level pad, or a raised frame.
Separate confirmed details from estimates. A nameplate photograph may establish rated capacity, while an old maintenance note may describe past condition rather than the unit’s status today. If labels are missing, obscured, or unsafe to reach, say so instead of trying to access them. Photographs taken from a safe position can help convey the unit’s size, condition, and surroundings.
Describe condition without operating the chiller
Useful observations include visible coil damage, missing or bent fan guards, signs of impact, corrosion, or apparent damage to the cabinet. These are descriptions, not a substitute for inspection or a reason to test the equipment. You do not need to energize, open, drain, vent, cut, or dismantle anything to request an offer. If the unit’s operating condition is unknown, list it as unknown.
Refrigerant and process fluid are different inventory questions. Refrigerant is part of the chiller’s cooling circuit; process fluid is the liquid circulated through the system serving the application. Do not release or remove either. State what records you have and let the removal plan account for any necessary refrigerant recovery by appropriately qualified personnel.
Capacity is not the same as transport weight
A chiller’s tonnage describes cooling capacity, not the load a crane or truck must handle. Physical dimensions, construction, remaining contents, and lifting arrangement all affect removal planning. If a shipping weight or rigging drawing is available, include it, but do not estimate a lift based only on tonnage. The buyer can review the available information and determine what additional planning is needed under the agreed arrangement.
Make the access picture clear
Removal access can matter as much as the unit description. A rooftop or elevated installation may require a lift plan and a protected area on the ground. For a unit at grade, the route from the chiller to a truck still matters. Provide photos showing nearby clearance, gates, overhead obstructions, and the likely loading area when you can do so safely. Note any known restrictions on site access or working hours.
For example, if a surplus unit sits behind a narrow gate, a photo and a brief measurement may help identify the access issue before scheduling is discussed. If it is on a roof, a distant view showing the building and surrounding ground area may be more useful than close-ups alone. These are planning examples, not assumptions about a particular Hanahan property.
Use a short checklist to close inventory gaps
- Make, model, and capacity, if known
- Visible fan and coil condition; compressor count where visible
- Roof, pad, or raised-frame location
- Available photographs, records, and known condition limits
- Access route, gates, overhead clearance, and loading-area constraints
Agree on the sale and removal plan
South Carolina Chiller Buyers pays upfront after an agreed purchase. The seller does not need to test, start, repair, or prepare the unit to request an offer. Once a purchase is agreed, the buyer handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered.
The authorized owner or site representative must still provide permission for the sale and coordinate site access. An offer and removal schedule depend on the equipment details, access, and agreement; no particular price or date can be promised in advance. A candid inventory—even one with unanswered questions—gives both sides a practical basis for deciding what information is needed next.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.