Sell a Surplus Water-Cooled Chiller in Florence, SC
We buy used water-cooled chiller equipment in Florence and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Water-Cooled Chiller in Florence, SC
If you own a surplus water-cooled chiller in Florence, South Carolina, South Carolina Chiller Buyers can review it for purchase. We are a direct buyer, not a seller of replacement equipment. Chillers of every tonnage are considered, including units below 20 tons; 20 to 2,000+ tons is a common range. We consider all brands and refrigerants. The unit’s size alone does not establish its value or whether a particular removal plan will work.
To request an offer, share what is known about the chiller and who can speak for the site. The equipment owner or authorized representative supplies ownership and equipment details. A site access contact can clarify operating conditions, what surrounding equipment remains in use, and how a removal crew could reach the machine. These roles may belong to the same person, but they do not have to.
Map the Two Water Circuits
A water-cooled chiller normally connects to both a chilled-water loop and a condenser-water loop. When describing your unit, identify both sets of connections and note, if known, which valves and pipe runs serve only the chiller and which are shared with other equipment. Do not operate valves or alter piping to gather information; existing records and safely obtained photographs are useful starting points.
Clarify what is included in the proposed sale. The cooling tower, pumps, controls, and related equipment may be part of the package or may need to stay with the property. That distinction affects the purchase scope and the removal plan. For example, if a pump serves multiple chillers, a photo or simple written note identifying it as shared can prevent an assumption that it is included.
Separate the Chiller from What Stays
Water-cooled chiller removal requires a plan that distinguishes the machine from shared piping and cooling equipment that will remain in service. Photos of valves, insulation, pipe runs, nearby equipment, and the machinery-room exit help show where the work begins and what access constraints may matter. Include wide views for context as well as closer views that identify connections. Do not open panels, drain lines, cut piping, or dismantle anything to prepare a request.
If the chiller sits beside equipment that must continue operating, tell the access contact and buyer before agreeing to a removal scope. A marked-up existing layout or a brief description of which systems must remain available can help identify questions for the site team. The removal details and schedule depend on the equipment, access, and final agreement.
Keep the Information Flow Clear
The owner or authorized site representative should provide the buyer with the chiller’s known make, model, capacity, age or status if available, and any records already on hand. The site access contact can then add practical details: where the machine is located, how a crew enters the area, whether stairs or narrow doorways are involved, and what site procedures apply. This is especially useful when the person approving a sale does not work in the machinery room.
Before an offer is finalized, confirm that the owner and access contact agree on what is being sold, what stays, who can authorize entry, and how access will be coordinated. The authorized owner or site representative must provide permission and coordinate access. Passing along unanswered questions is better than guessing—for instance, if nobody knows whether a control panel belongs to the chiller or a shared system, identify that uncertainty for review.
Capacity Is Not Removal Weight
A chiller’s tonnage describes cooling capacity, not its transport weight or the space needed to remove it. The installed configuration, dimensions, surrounding piping, doorway clearances, and lifting route all affect planning. Photos and available equipment records can help the buyer assess the situation, but they do not replace a site-specific review where one is needed. Do not move, lift, or prepare the unit yourself to estimate its weight or route.
Once a purchase is agreed, South Carolina Chiller Buyers handles disconnection, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to test, start, repair, or prepare the chiller to request an offer. Payment is upfront, with the purchase and removal arrangements set by agreement; no particular price or date can be assumed before the equipment and access details are reviewed.
Useful Details to Send with a Request
A concise equipment-and-access summary can make initial review more productive. Share only information you can provide safely or already have available:
- Chiller make, model, stated capacity, and known operating or storage status.
- Photos showing both water-loop connections, valves, pipe runs, insulation, and nearby shared equipment.
- Whether the cooling tower, pumps, controls, and other associated items are included or remain on site.
- Machinery-room location, exit route, access limitations, and the contact authorized to coordinate entry.
Request an Offer for Your Florence Chiller
Send the available equipment information and identify the person who can confirm site access. If details are missing, say so rather than commissioning tests or arranging repairs. The buyer can review the chiller and proposed scope, then discuss an offer and removal plan based on the equipment and agreement. This gives the owner a clear path to consider a surplus water-cooled chiller in Florence without treating shared utilities or site responsibilities as afterthoughts.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.