Sell a Surplus Air-Cooled Chiller in Florence, SC
We buy used air-cooled chiller equipment in Florence and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Air-Cooled Chiller in Florence, SC
South Carolina Chiller Buyers purchases surplus air-cooled chillers in Florence, South Carolina. We buy equipment across all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range, not a minimum. We consider all brands and refrigerants. We are a direct buyer, not a seller of replacement equipment, and payment is upfront after an agreed purchase.
An air-cooled chiller rejects heat outdoors through coils and fans, rather than relying on a conventional cooling-tower loop. That arrangement affects how the unit is situated and removed, but it does not tell us its transport weight. To request an offer, you do not need to test, start, repair, or prepare the chiller.
Cooling Capacity and Shipping Weight Are Different Measures
Nominal capacity, stated in tons of cooling, describes the chiller’s rated heat-removal capacity. It is not a weight rating. Two air-cooled units with similar tonnage may differ in physical size, construction, compressor arrangement, refrigerant charge, and installed accessories. Their weights—and the equipment needed to remove them—can therefore differ.
Documented weight is more useful for planning lifting and transport. If available, share a nameplate, manufacturer record, or other reliable equipment document that states model and weight. If no weight is documented, say so rather than estimating from tonnage. The buyer can assess the available information and determine what further planning is needed under the proposed agreement.
Describe the Unit as It Sits
When requesting an offer for your air-cooled chiller in Florence, provide the make and model if visible, approximate or rated tonnage if known, and the unit’s current condition as you understand it. Helpful observations include fan and coil condition and the compressor count where visible. Do not open panels or approach moving parts to gather details; use existing records or observations made from a safe, accessible position.
Also note whether the chiller is on a roof, at grade on a pad, or mounted on a raised frame. This information helps distinguish the equipment itself from the access and rigging work required to remove it. A unit’s location may affect the removal plan even when its capacity and weight are already documented.
Access Can Shape the Removal Plan
For a rooftop or elevated installation, removal may require a lift plan and a protected area on the ground for equipment operations. At grade, the route from the chiller to a truck still matters. Photos showing surrounding clearance, gates, and overhead obstructions can help the buyer review access without asking you to move or dismantle anything.
For example, if a unit is on a roof with limited space near the proposed lifting area, that condition may call for additional planning. If it is on a pad but a gate or overhead obstruction narrows the route, the access details may matter more than the nominal tonnage. These are conditional examples; the appropriate plan depends on the actual equipment, site, and agreed removal arrangements.
Refrigerant Is Not Process Fluid
Air-cooled chillers use refrigerant within their refrigeration circuit. In some applications, the chiller also cools a separate process fluid or water circuit. These are distinct systems; a description of the process fluid does not identify the refrigerant, and neither should be inferred from appearance alone.
Share any refrigerant information available in existing records or on accessible documentation. Do not vent refrigerant or attempt to drain, open, or alter the equipment. After an agreed purchase, South Carolina Chiller Buyers handles necessary refrigerant recovery through appropriately qualified personnel as part of the removal process.
What to Include in an Offer Request
- Brand, model, and known cooling capacity.
- Documented weight, if available, and visible fan, coil, or compressor details.
- Installation position: roof, grade-level pad, or raised frame.
- Photos of clearance, access route, gates, and overhead obstructions.
- Known refrigerant details and any relevant equipment records.
These details support a more informed review, but they do not guarantee a particular offer or removal date. The offer and schedule depend on the equipment and the terms agreed between the parties.
After a Purchase Is Agreed
Following an agreed purchase, the buyer handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight; freight is covered. The authorized owner or site representative must still provide permission and coordinate access. Do not arrange shipment yourself or dismantle the chiller in preparation for removal.
Whether your surplus unit is a compact model or a large installation, provide the available records and a clear description of its placement. That gives South Carolina Chiller Buyers a practical basis to review an air-cooled chiller in Florence without treating rated tons as a substitute for documented weight or overlooking the access conditions at the site.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.