BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Water-Cooled Chiller in Spartanburg, SC

We buy used water-cooled chiller equipment in Spartanburg and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Water-Cooled Chiller in Spartanburg, SC

If you have a surplus water-cooled chiller in Spartanburg, South Carolina, South Carolina Chiller Buyers can consider it for purchase. We are a direct buyer, not a seller of replacement equipment. We review chillers of all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range, but it is not a cutoff. We consider all brands and refrigerants.

To begin, the equipment owner or authorized representative can share basic details and photos. The information does not need to be a complete engineering package. A clear account of what is being sold, what remains on site, and who can authorize access helps us assess the unit and discuss an offer and possible removal plan.

Map the Chiller’s Two Water Circuits

A water-cooled chiller normally interfaces with a chilled-water loop and a separate condenser-water loop. When describing your unit, identify both sets of connections if that information is available. Also clarify whether the cooling tower, pumps, and related controls are included in the proposed sale or will remain with the property.

These distinctions matter because connected equipment is not automatically part of the chiller purchase. For example, if a tower serves multiple systems, it may need to stay in service after the chiller is removed. If the pumps are dedicated to the surplus unit, their inclusion still needs to be agreed rather than assumed. You do not need to disconnect or inspect the system yourself to explain what is known.

Describe What Is Included—and What Stays

A practical first description can include the manufacturer and model, approximate capacity, age if known, and whether the chiller is installed or already out of service. Capacity is a cooling rating, not a measure of how heavy or difficult the machine is to move. Removal planning depends on the actual equipment, access route, surrounding services, and agreed scope—not tonnage alone.

Useful photos may show the chiller from several sides, its nameplate if safely visible, the chilled-water and condenser-water piping, valves, insulation, and the route toward the machinery-room exit. Images of nearby equipment can help show what is shared and what is intended to remain. Do not open panels, move piping, or energize equipment to produce photos.

Keep Owner and Site-Access Information Aligned

The owner or authorized seller provides the purchase information and confirms what equipment is available. A site access contact may be a facilities representative or another person authorized to coordinate entry and logistics. That contact can explain access procedures, operating constraints, loading areas, and any site-specific requirements without taking responsibility for approving a sale unless authorized to do so.

Before a removal schedule is discussed, make sure the owner and access contact agree on the chiller’s boundaries: which pumps, controls, piping, and other components are included, and which must stay connected or protected. If different people hold the equipment information and control site access, connect them early so questions can be answered without assumptions. The owner or authorized site representative must provide permission and coordinate access.

Plan Around Shared Services and the Exit Route

For water-cooled chiller removal, the disconnection plan must distinguish the chiller from shared piping and any cooling equipment that remains in use. Photos of valves, insulation, pipe runs, and the machinery-room exit help establish the scope. If the route includes tight turns, low clearances, stairs, or a restricted doorway, mention that in the initial discussion rather than treating the chiller’s rated tonnage as a guide to transport difficulty.

The unit’s transport weight and dimensions are separate from its cooling capacity. Actual lifting and hauling requirements are assessed for the specific machine and route. Do not cut, drain, dismantle, or disconnect the chiller in preparation for an offer. After an agreed purchase, the buyer handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered.

What to Send When Requesting an Offer

  • Known make, model, capacity, and refrigerant, if available.
  • Photos of the chiller, both water circuits, nearby shared equipment, and the exit route.
  • A note identifying what is included and what must remain at the property.
  • The owner or authorized seller’s contact and the site access contact’s role.

These details help establish whether the equipment and removal scope are a fit. Unknown information can be identified as unknown; do not guess at refrigerant type, weight, or connection details.

Offers and Removal Timing Depend on the Agreement

Payment is upfront after the purchase terms are agreed. The offer and removal schedule depend on the chiller, the agreed scope, and site access, so neither a particular price nor a specific removal date should be assumed before review. If your Spartanburg-area facility has a surplus water-cooled unit, share what you know and coordinate with the authorized access contact. You do not need to test, start, repair, or prepare the chiller to request an offer.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote