Sell a Surplus Air-Cooled Chiller in Mount Pleasant, SC
We buy used air-cooled chiller equipment in Mount Pleasant and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Air-Cooled Chiller in Mount Pleasant, SC
If you have a surplus air-cooled chiller in Mount Pleasant, South Carolina, South Carolina Chiller Buyers may consider purchasing it. We are the direct buyer, not a seller of replacement equipment. We consider all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We also consider all brands and refrigerants. An older label, incomplete service file, or uncertain operating history does not by itself tell us what the unit is worth, so share what you can verify rather than filling gaps with guesses.
Identify the Unit Without Relying on One Old Label
Equipment labels can fade, become obscured, or reflect an earlier configuration. Send clear photos of the data plate and the overall chiller, if they are accessible without opening or disturbing the equipment. Useful details may include manufacturer, model, serial number, stated capacity, refrigerant, and approximate age. If a label is missing or unreadable, say so; do not infer a model or refrigerant from the unit’s appearance.
Keep documented facts distinct from estimates. A facility record may list a nominal tonnage while a later service note describes a change in operating conditions. If records conflict, provide both and identify their sources. The unit’s capacity is not its transport weight: moving requirements depend on actual dimensions, configuration, and weight information, not tonnage alone.
Describe the Air-Cooled Configuration
Air-cooled chillers reject heat through outdoor coils and fans rather than through a conventional cooling-tower loop. For an initial review, note the visible condition of the fans and coils, the compressor count where visible, and whether the unit sits on a roof, pad, or raised frame. These observations help describe the equipment; they are not a request to inspect it internally or determine whether it can run.
Distinguish the chiller’s refrigerant from the process fluid it may have cooled. Records might identify both, and they are not interchangeable. If you cannot confirm either, report the uncertainty instead of guessing based on an old tag or a nearby pipe. Do not open the machine, drain fluid, or release refrigerant to identify contents.
Share Retrofit and Service Records Carefully
Past retrofit records can clarify whether the refrigerant or controls changed, but a note about planned work does not prove that work was completed. If available, share relevant service summaries, refrigerant retrofit documentation, or updated equipment schedules, and indicate whether each record is confirmed, proposed, or uncertain. An old label and a later record may describe different points in the unit’s history; include both when they disagree.
You do not need to test, start, repair, or prepare the chiller to request an offer. Do not energize it or open, cut, dismantle, or drain any part for photographs or identification. Photos and existing documentation are enough to begin a discussion, even when some details remain unknown.
Plan Around the Installation and Removal Route
A rooftop or elevated chiller can require a lift plan and a protected area at ground level. For a unit at grade, the route from its position to a truck matters too. Provide photos showing surrounding clearance, gates, overhead obstructions, and the path a removal crew would need to consider. Note stairs, restricted access, or other visible constraints without attempting to move equipment yourself.
For example, if a unit is on a roof and the ground area below is occupied or difficult to protect, that may affect removal planning. If it is on a pad but behind a narrow gate or beneath overhead lines, the route may matter more than the short distance to the truck. These are conditional planning considerations, not assumptions about any particular Mount Pleasant site. Share access details and coordinate with the authorized owner or site representative.
What Happens After an Agreement
Once a purchase is agreed, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered; you do not need to arrange shipment or hire a carrier. The authorized owner or site representative must still grant permission and coordinate access to the equipment and removal area.
Payment is upfront. The offer and removal schedule depend on the chiller’s details, access conditions, and the terms agreed with the seller. No specific price or date can be assumed before those factors are reviewed and an agreement is reached.
Information to Gather Before Requesting an Offer
Collect only information already available or safely visible. A concise, accurate description is more useful than unsupported conclusions. You can include:
- Photos of the full unit, accessible labels, visible fans and coils, and its mounting location.
- Known capacity, brand, model, refrigerant, and compressor count, with uncertain details clearly marked.
- Any retrofit or service records that may explain changes to the label or configuration.
- Access notes, including the removal route, gates, overhead obstructions, and site contact authorized to coordinate access.
With those details, we can review your air-cooled chiller in Mount Pleasant and discuss whether it fits a purchase. Missing information is not a reason to invent an answer: tell us what is known, flag what is unclear, and let the equipment review guide the next step.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.