BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Water-Cooled Chiller in Myrtle Beach, SC

We buy used water-cooled chiller equipment in Myrtle Beach and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Water-Cooled Chiller in Myrtle Beach, SC

South Carolina Chiller Buyers purchases surplus water-cooled chillers in Myrtle Beach and throughout South Carolina. If a unit has been placed in storage, retired after a process change, or left unused while other equipment remains in service, you can request an offer without first testing or preparing it. We are a direct buyer, not a seller of replacement equipment.

We consider chillers of all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We consider all brands and refrigerants. A separate controller or starter can be part of the equipment being offered, but clarify whether it belongs with the chiller, is stored elsewhere, or will remain with the property. The offer and removal arrangements depend on the equipment and the agreed scope.

Describe the Full Water-Cooled Setup

A water-cooled chiller normally connects to two distinct systems: the chilled-water loop that serves the cooling load and the condenser-water loop that carries heat away, often through a cooling tower. When requesting an offer, identify both sets of connections and note what is included in the sale. The cooling tower, pumps, controls, and any separate starter may be included or may stay at the site.

This distinction matters especially when the chiller is already in storage. A stored controller or starter may be associated with the machine even if it is not mounted on it. Describe its location and condition as known, and provide photos if convenient. Do not energize equipment or open electrical enclosures to obtain information; existing records and safe, accessible exterior views are useful starting points.

Separate Capacity from Removal Weight

Chiller capacity, usually expressed in tons, is not the same as the machine’s transport weight. Capacity helps identify the unit’s cooling output, while weight and dimensions affect lifting, rigging, and hauling. A high-capacity chiller may have a different removal profile from another unit with similar tonnage because construction, configuration, and included components vary.

If available, share the model and serial information, approximate dimensions, and any existing weight data. Do not estimate by dismantling the machine. For a unit in storage, mention whether the controller, starter, or other components are stored separately and whether the chiller can be reached through the building’s machinery-room exit. These details help define the scope without requiring you to move or prepare the equipment.

Show What Connects and What Must Stay

Water-cooled chiller removal requires a plan that separates the unit from shared piping and any cooling equipment that will remain in operation. A cooling tower, pump, or pipe run may serve other equipment, so it should not be assumed to transfer with the chiller. The authorized owner or site representative must identify what may be removed, grant permission, and coordinate access.

Photos can help establish the boundaries. If safely accessible, images of valves, insulation, visible pipe runs, the chiller, and the route to the machinery-room exit can clarify the arrangement. Note whether a controller or starter is nearby or stored in a separate location. There is no need to open, drain, cut, or dismantle anything to request an offer.

What Happens After an Agreement

You do not need to test, start, repair, or prepare the chiller before requesting an offer. After a purchase is agreed, South Carolina Chiller Buyers handles the removal work within the agreed scope, including disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered.

Refrigerant is not the same as process fluid. Refrigerant is contained within the chiller’s cooling circuit; water or another process fluid may be present in connected loops. Do not vent refrigerant or drain connected systems. The qualified removal personnel and site representative can coordinate the necessary work and clarify which systems or equipment remain in place.

Useful Details for a Myrtle Beach Offer Request

When you contact us about your water-cooled chiller in Myrtle Beach, share the information you already have rather than delaying to create a complete technical file. A brief description, existing records, and accessible photos can help explain whether the unit is installed or in storage and whether a separate controller or starter is involved.

  • Brand, model, serial number, and stated capacity, if known.
  • Whether the chilled-water and condenser-water connections are still attached.
  • What is included or excluded, such as the cooling tower, pumps, controls, or starter.
  • Known dimensions, weight information, storage location, and access constraints.
  • Photos of visible connections, valves, pipe runs, and the machinery-room exit, if safely available.

Agree on Scope Before Scheduling Removal

For example, if a chiller is stored with its starter in a different room, both items can be described so the offer can reflect what is actually available. If the cooling tower and pumps must stay because they serve other equipment, state that clearly. These are conditional examples, not assumptions about any particular Myrtle Beach property.

Payment is upfront. The offer and removal schedule depend on the chiller, included components, access, and the final agreement; no specific price or date can be promised in advance. Once the authorized representative approves the scope and coordinates site access, the buyer and site team can arrange the agreed removal.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote