BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Water-Cooled Chiller in Port Royal, SC

We buy used water-cooled chiller equipment in Port Royal and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Water-Cooled Chiller in Port Royal, SC

South Carolina Chiller Buyers purchases surplus water-cooled chillers in Port Royal and elsewhere in South Carolina. We buy equipment; we do not sell replacement chillers. We consider all tonnages, including units below 20 tons, with 20 to 2,000+ tons representing a common range. We also consider all brands and refrigerants. A unit does not need to be running or ready for operation for you to request an offer.

When describing your water-cooled chiller, rely on what you can verify rather than what an old label seems to imply. A faded nameplate, handwritten note, or outdated equipment schedule may not reflect the unit’s current configuration. Clear photographs and available records can help us assess it without asking you to start, open, drain, vent, repair, or dismantle anything.

Trace Both Water Circuits Before Describing Scope

A water-cooled chiller normally connects to two separate water circuits: a chilled-water loop and a condenser-water loop. Identify both sets of connections if they are visible, and note whether the cooling tower, pumps, and associated controls are included in the sale or will remain with the property. These items may serve other equipment, so do not assume that everything in the machinery room belongs to the chiller being offered.

If markings are missing or the piping layout is unclear, say so rather than assigning a connection based on guesswork. A photograph of the machine and its surrounding pipe runs may be more useful than an uncertain description. Process fluid in a plant or building system is distinct from refrigerant inside the chiller; neither should be identified or handled by assumption.

Old Labels and Retrofit Records Need Context

Older chillers may have a faded original nameplate, replacement labels, or records from a refrigerant retrofit or other service work. If you have documentation, share the relevant information, such as a readable model and serial number, known refrigerant changes, or a service record that describes a modification. Treat those records as supporting information, not proof that the current unit matches every older document.

If the label cannot be read, the refrigerant is uncertain, or records conflict, report that plainly. Do not infer a refrigerant from the unit’s age, brand, paint color, or a nearby container. We consider chillers using all refrigerants, but accurate identification helps define what is being evaluated and what qualified personnel may need to address during removal.

Photos Help Show the Removal Boundary

For water-cooled chiller removal, the plan must distinguish the chiller from shared piping and equipment that will stay in service. Photos of visible valves, insulation, pipe runs, the machine’s access route, and the machinery-room exit can help establish the likely scope. Include the chiller’s surroundings and any obvious clearance limits, but do not move covers, reach into equipment, or remove insulation to improve a picture.

Capacity and transport weight are different facts. A chiller’s tonnage describes cooling capacity, not how heavy the equipment is or whether it can pass through a particular opening. If weight information is available on a verified equipment document, provide it; otherwise, do not estimate from tonnage alone. Access, rigging needs, and the removal route must be considered alongside the unit itself.

Useful Details to Gather for an Offer

  • Readable nameplate details or photos, if safely visible.
  • Any available retrofit, refrigerant, or service records, with uncertainties identified.
  • Whether the cooling tower, pumps, and controls are included or staying on site.
  • Photos showing both water circuits, shared piping, valves, access, and the exit route.
  • Your role in authorizing the sale and coordinating site access.

Illustrative Situations: Describe What You Know

If a property has retired a chiller but kept its cooling tower for another system, indicate that the tower is excluded rather than presenting the entire cooling-water arrangement as part of the sale. If a retrofit note lists a refrigerant that differs from a faded machine label, provide both sources and explain that the present configuration has not been confirmed. If the chiller sits behind shared insulated pipework, photographs from the existing access area can show the issue without anyone cutting or dismantling the piping.

These examples are practical ways to report uncertainty, not assumptions about any particular Port Royal site. You do not need to diagnose the equipment or develop a disconnection plan before requesting an offer. South Carolina Chiller Buyers reviews the equipment and the proposed scope with you.

Purchase, Payment, and Removal

After the purchase terms are agreed, South Carolina Chiller Buyers handles the removal arrangements, including disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The authorized owner or site representative must still grant permission for the sale and coordinate access with the buyer and site personnel.

Payment is upfront. The offer and removal schedule depend on the specific chiller, the information available, site access, and the agreement reached; neither a particular price nor a specific removal date can be promised in advance. You do not need to test, start, repair, or prepare the unit to ask about an offer. Share verified details where possible, flag anything uncertain, and let the agreed scope guide the next steps.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote