Sell a Surplus Air-Cooled Chiller in Myrtle Beach, SC
We buy used air-cooled chiller equipment in Myrtle Beach and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Air-Cooled Chiller in Myrtle Beach, SC
If you have an air-cooled chiller you no longer need in Myrtle Beach, South Carolina, South Carolina Chiller Buyers may consider buying it directly. We buy used chillers; we do not sell replacement equipment. We consider all tonnages, including units below 20 tons, with 20 to 2,000+ tons being a common range, as well as all brands and refrigerants. A unit does not need to be running to request an offer.
Describe the Unit and Its Setting
Air-cooled chillers reject heat through outdoor coils and fans, rather than relying on a conventional cooling-tower loop. When sharing details, note the fan and coil condition, compressor count if visible, and whether the chiller sits on a roof, pad, or raised frame. Photos taken from safe, accessible positions can help show the overall condition and installation without requiring anyone to approach hazardous areas.
Also share any model or capacity information already available on records or visible labels. Capacity is not the same as transport weight: tonnage describes cooling capacity, while weight and dimensions affect lifting, loading, and hauling. If weight is uncertain, provide the available documentation and clear photos rather than trying to measure or move the equipment.
Plan Around Roof and Crane Access
A rooftop or elevated chiller may require a crane, a suitable lift plan, and a protected area on the ground for the lifting operation. For a unit in Myrtle Beach, the important details are specific to the site—not simply the city or the chiller’s capacity. Useful information includes the route to the crane setup area, roof access constraints, nearby structures, overhead obstructions, and the space available for controlled lifting and loading.
For example, if a surplus unit is on a roof and a crane could potentially reach it, the seller can share site photos and arrange for an authorized representative to confirm access and permission. Whether that lift is workable depends on the equipment, site conditions, and agreed removal plan; do not assume a crane can be placed or operated without review.
Ground-Level Units Still Need a Clear Route
A chiller on a pad may avoid a rooftop lift, but the path from the unit to a truck still matters. Photos can help show surrounding clearance, gates, pavement or other route conditions, and overhead lines or structures. A narrow passage or an obstruction could affect how removal is planned, even when the equipment is at grade. Provide what you can observe safely and let the removal plan account for the actual site.
The seller does not need to dismantle the chiller or arrange transport. After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging when needed, loading, hauling, and freight. Freight is covered.
What to Share When Requesting an Offer
To help evaluate a surplus air-cooled chiller, provide its location, any known make, model, capacity, age, and operating history, plus the installation type and access details. If some information is unknown, say so. Do not start, test, open, drain, cut, or dismantle equipment to gather details. A seller does not have to repair or prepare the unit before requesting an offer.
- Share available equipment records and safe-to-take photos of the chiller, installation, and access route.
- Identify whether the unit is on a roof, raised frame, or ground-level pad, and note visible clearance constraints.
- Arrange for the authorized owner or site representative to confirm permission and coordinate access.
Refrigerant and Process Fluid Are Different
Air-cooled describes how the chiller rejects heat; it does not identify every fluid in the equipment or connected system. Refrigerant circulates within the chiller’s refrigeration circuit. A separate process or chilled-water fluid may flow through connected piping. Do not vent, drain, or disconnect either system to prepare for an offer. If refrigerant information is available from existing records, include it; all refrigerants are considered, with any necessary recovery handled by appropriately qualified personnel after an agreed purchase.
Offer and Removal Depend on the Agreement
Payment is upfront once the purchase terms are agreed. The offer and removal schedule depend on the chiller, its condition, access, and the details of the agreement, so neither a specific price nor a particular removal date can be promised in advance. The authorized owner or site representative must provide permission and coordinate access, even though the buyer manages the removal work and freight.
Whether your Myrtle Beach unit is roof-mounted or at grade, accurate information about the equipment and route helps determine whether a purchase and removal plan can be agreed. You can request consideration without first starting, repairing, testing, or preparing the chiller.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.