Sell a Surplus Water-Cooled Chiller in Moncks Corner, SC
We buy used water-cooled chiller equipment in Moncks Corner and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Water-Cooled Chiller in Moncks Corner, SC
If you have a surplus water-cooled chiller in Moncks Corner, South Carolina, South Carolina Chiller Buyers can consider it for purchase. We are a direct buyer, not a seller of replacement equipment. We review chillers of all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We consider all brands and refrigerants, so an older or less familiar unit may still be worth describing.
You do not need to test, start, repair, or prepare the chiller to request an offer. Share the information you have and let us know what equipment is included, what must remain, and what access conditions may affect removal. An offer and removal schedule depend on the particular equipment and the terms agreed with the authorized owner or site representative.
Describe Both Water Circuits
A water-cooled chiller normally connects to two separate water systems: the chilled-water loop that serves the cooling load and the condenser-water loop that carries heat away from the chiller. In your description, identify both sets of connections as best you can. Note whether the cooling tower, pumps, controls, and related equipment are part of the sale or remain at the property. Do not open or alter piping to identify it.
Also distinguish process fluid from refrigerant. Water or another fluid may circulate through the site’s piping, while refrigerant is contained within the chiller’s refrigeration circuit. These are different systems and should not be treated as interchangeable when discussing what the buyer is acquiring or what removal requires.
Clarify What Is Included
A surplus chiller can be sold by itself or as part of a larger equipment group, depending on what the parties agree to include. A cooling tower, pumps, piping, valves, insulation, and controls may be connected to its operation without being included in the purchase. Make a simple list of the items that are included and those that must stay, especially if other equipment on site still relies on shared systems.
Photos can help establish the proposed scope without requiring anyone to disturb the equipment. Useful views include the chiller’s identification plate, overall placement, visible valves and insulation, pipe runs, nearby equipment, and the machinery-room exit. If possible, include a view showing the route from the chiller to the loading area. Avoid opening panels or entering restricted areas to take pictures.
Plan Around Shared Piping and Access
The disconnection plan needs to separate the chiller from shared piping and any cooling equipment that will remain in service. If a pipe serves both the chiller and another operating unit, point that out before removal is scheduled. The buyer can review the proposed scope and coordinate the work after an agreed purchase; the seller should not cut, drain, dismantle, or otherwise prepare the equipment.
Access details matter as much as the chiller’s capacity. Describe doorways, corridors, floor-level changes, overhead limits, and the path to an exterior loading point. If the unit is on a rooftop, for example, a crane may be needed, but the site must permit the work and provide suitable crane access. That is a conditional planning example, not an assumption that any particular property in Moncks Corner has rooftop equipment or crane access.
Capacity Is Not Transport Weight
Chiller tonnage describes cooling capacity; it does not tell a buyer how much the unit weighs or whether it can pass through a particular opening. Two units with similar capacity may have different dimensions, configurations, and transport requirements. The model and serial information, visible nameplate details, and any available drawings can help assess the equipment. Do not estimate removal requirements from tonnage alone.
If the chiller’s weight is unknown, say so rather than guessing. Room to maneuver, access route, lifting points, and the loading location also affect removal planning. Clear photos and accurate access notes are more useful than an unsupported weight or a promise that a unit can be moved through a tight route.
What Happens After an Agreement
Once a purchase is agreed, South Carolina Chiller Buyers handles the removal logistics, including disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging when needed, loading, hauling, and freight. Freight is covered. The seller does not need to hire a carrier, ship the chiller, or arrange the removal crew.
The authorized owner or site representative still needs to grant permission and coordinate access. This includes communicating site rules, arranging entry, identifying equipment that must remain in service, and confirming the areas available for removal work. The specific work plan and timing depend on the equipment, access, and agreement; neither a price nor a removal date should be assumed before those details are reviewed.
Request an Offer With Practical Details
When requesting an offer for your water-cooled chiller in Moncks Corner, provide the make and model if known, approximate capacity, refrigerant information if available, and a brief description of the chiller’s condition and location. Include what is and is not part of the sale, whether piping is shared, and any rooftop, crane, doorway, or loading constraints. You may submit the information you already have without testing or repairing the unit.
- Identify the chilled-water and condenser-water connections, and note which related equipment is included.
- Share safe, accessible photos of the unit, piping, valves, route, and machinery-room exit.
- Confirm that the owner or authorized site representative can approve the sale and coordinate access.
These details help establish whether the chiller and proposed removal scope fit an offer. The review remains specific to the equipment and site conditions, with the purchase terms and schedule set only by mutual agreement.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.