BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Water-Cooled Chiller in Kingstree, SC

We buy used water-cooled chiller equipment in Kingstree and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Water-Cooled Chiller in Kingstree, SC

If your site in Kingstree has a water-cooled chiller that is idle, surplus, or scheduled for replacement, South Carolina Chiller Buyers may make an offer to purchase it. We are the direct buyer, not a seller of replacement equipment. We consider all brands, refrigerants, and tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range.

Nominal cooling capacity and equipment weight describe different things. Capacity, usually stated in tons, indicates the chiller’s cooling output. Weight, usually documented in pounds or tons of mass, affects rigging and transport planning. A large-capacity machine is not automatically a particular weight, so use the model nameplate, manufacturer documents, or existing site records when available rather than estimating weight from cooling tons.

Identify What Belongs to the Chiller

A water-cooled chiller normally connects to two separate water circuits: the chilled-water loop serving the cooling load and the condenser-water loop that carries heat toward a cooling tower or another heat-rejection arrangement. For an offer request, identify the chiller and note what is included in the potential sale. The tower, pumps, controls, and other nearby equipment may remain with the property.

If you have equipment records, useful details include the manufacturer, model, serial number, stated capacity, refrigerant, and documented shipping or operating weight. Photographs can help clarify the unit’s condition and surroundings. Do not operate the machine or remove covers to gather information; existing records and safe exterior views are often enough to begin a discussion.

Capacity Is Not a Rigging Estimate

A chiller rated at a stated number of tons does not weigh that many tons. Cooling tons measure performance, while transport weight is the physical load that lifting and hauling plans must account for. The documented weight may refer to the bare machine, a shipping configuration, or an operating unit with specified contents, so note the source and wording if you have a figure.

When weight records are missing, do not substitute the capacity rating or guess from the machine’s dimensions. Share the nameplate and available site information instead. The buyer can review the equipment and discuss what additional information is needed before an offer and removal scope are agreed. The equipment’s configuration, access, and handling requirements affect planning; no single capacity figure establishes a price or removal date.

Clarify the Removal Boundary

Water-cooled chiller removal requires a plan that separates the machine from shared piping and cooling equipment that must continue serving the property. The boundary may not be obvious where insulated pipe runs, valves, or controls connect with other systems. Photos of the valves, insulation, pipe routes, and machinery-room exit can help explain what is connected and how the unit may be moved out.

For example, if a cooling tower and pumps will stay in service, the scope should identify them as retained equipment and show where the chiller’s connections meet shared systems. If the chiller is isolated from other operating equipment, that can also be noted. These are planning examples, not assumptions about any particular Kingstree property. An authorized owner or site representative must provide permission and coordinate access.

Information That Helps Start an Offer

  • Manufacturer, model, serial number, refrigerant, and documented capacity or weight, if available.
  • Exterior photos of the machine, nameplate, connected piping, nearby equipment, and exit route.
  • A clear note on whether the cooling tower, pumps, controls, and connected piping are included or staying on site.
  • Known access limits or site requirements relevant to disconnection and removal.

You do not need to test, start, repair, or prepare the chiller to request an offer. Do not open, drain, cut, dismantle, or vent the equipment. If records are incomplete, say what is unknown rather than filling gaps with estimates.

What Happens After Agreement

Once a purchase is agreed, South Carolina Chiller Buyers handles the removal work: disconnections, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to arrange shipping or hire a separate removal crew. The authorized site representative still needs to approve the work and coordinate access to the equipment and relevant areas.

Payment is upfront. The offer and removal schedule depend on the specific chiller, available information, access, and agreed scope, so neither price nor timing should be assumed before review and agreement. For a surplus water-cooled chiller in Kingstree, start with the records and photos you already have; accurate distinctions between cooling capacity, documented weight, and included equipment make the discussion more useful.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote