BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Air-Cooled Chiller in Inman, SC

We buy used air-cooled chiller equipment in Inman and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Air-Cooled Chiller in Inman, SC

South Carolina Chiller Buyers purchases surplus air-cooled chillers in Inman and throughout South Carolina. We are a direct buyer, not a seller of replacement equipment. If a system is no longer needed, has been replaced, or is being held for a project that will not proceed, you can request an offer without first making the chiller operational or preparing it for removal.

We consider all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. We review all brands and refrigerants. The equipment’s age, condition, configuration, location, and removal requirements help determine whether we can make an offer and what schedule is workable. Neither a particular price nor a removal date can be guaranteed before the details are reviewed and an agreement is reached.

What to note about an air-cooled unit

Air-cooled chillers reject heat through outdoor coils and fans, rather than relying on a conventional cooling-tower loop. That distinction helps identify the equipment being offered and gives useful context for its layout. If readily visible, note the fan and coil condition, the number of compressors, and whether the chiller sits on a roof, ground-level pad, or raised frame. Do not open panels or operate the unit to gather information.

Chiller capacity, usually described in tons, is not the same as transport weight. A smaller-capacity unit can still be difficult to remove because of its dimensions, construction, or position; a larger unit may have a more straightforward route. If a nameplate or existing records provide model, capacity, approximate weight, or refrigerant details, share those details. Do not guess when information is unavailable.

Roof access and removal planning

A rooftop air-cooled chiller can require a crane, a lift plan, and a protected area at ground level. If your Inman-area unit is elevated, tell us how it is positioned and provide photos of the surrounding roof area and the intended lifting or staging zone, if you can do so safely. Information about nearby obstructions, access restrictions, and where a truck might be positioned helps assess whether removal can be coordinated.

For example, if a surplus chiller is on a roof and crane placement depends on access through a controlled site entrance, the authorized owner or site representative must approve access and coordinate it with the removal plan. A photograph alone does not replace that permission. The practical route, site rules, and agreed schedule all matter before a lift can be arranged.

Ground-level units still need a clear route

A chiller on a pad may avoid rooftop lifting, but its path to a truck still affects removal. Share photos that show clearance around the unit, the route out, gates, changes in elevation, and overhead obstructions. If the chiller is on a raised frame, mention that as well. These details help distinguish a unit that can be approached directly from one that may need additional rigging or access planning.

Do not move stored materials, remove barriers, or dismantle equipment just to request an offer. Instead, describe what is present and let the removal requirements be evaluated against the site conditions. If photos cannot be taken safely or access is restricted, a short explanation is useful.

Information that helps us review your chiller

  • Location in Inman, equipment brand and model if known, and any available capacity or refrigerant records.
  • Visible fan and coil condition, compressor count where visible, and whether the unit is on a roof, pad, or raised frame.
  • Photos of surrounding clearance, the route to a truck, gates, overhead obstructions, and any relevant access limits.
  • Whether the unit is surplus, and who is authorized to approve site access and coordinate removal.

You do not need to test, start, repair, drain, open, or prepare the chiller to request an offer. Do not vent refrigerant or disconnect, cut, or dismantle the equipment. If process fluid is present in the system, it is distinct from refrigerant; do not assume that one description or handling requirement covers both.

Offer, payment, and removal responsibilities

After you accept an offer and the purchase is agreed, South Carolina Chiller Buyers handles the removal process, including disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller is not expected to hire a hauler or ship the chiller.

Payment is made upfront under the agreed purchase terms. The authorized owner or site representative must still provide permission and coordinate access. The offer and removal schedule depend on the equipment, site conditions, and agreement; share accurate information so those details can be reviewed before plans are confirmed.

Request an offer for your Inman air-cooled chiller

If you have a surplus air-cooled chiller in Inman, send the details you have and explain where the unit is installed. Include roof or ground-level access information when relevant, especially if a crane may be needed. A clear description helps us assess the equipment and removal constraints without asking you to operate or alter it.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote