Sell a Surplus Centrifugal Chiller in Duncan, SC
We buy used centrifugal chiller equipment in Duncan and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Centrifugal Chiller in Duncan, SC
South Carolina Chiller Buyers purchases surplus centrifugal chillers in Duncan, South Carolina. We are a direct buyer, not a seller of replacement equipment. If a unit is no longer needed, is being removed during a plant change, or is being kept as a spare that the owner has decided to sell, you can request an offer without first making it operational.
We consider chillers of every tonnage, including units below 20 tons; 20 to 2,000+ tons is a common range. We consider all brands and refrigerants. Whether a particular machine is a fit and what it may be worth depend on its identity, condition, completeness, access, and the purchase terms. An offer and removal schedule are established by agreement, not assumed in advance.
Define the sale before describing the equipment
A centrifugal chiller can be connected to much more than the machine itself. Before requesting an offer, clarify which identifiable equipment belongs in the sale and which items the owner intends to keep. For example, a seller might offer the chiller package while retaining a separate cooling tower, plant pumps, piping, or building controls. In another situation, a dedicated starter or control panel may be included if it is part of the agreed equipment package.
Make the boundary explicit rather than relying on what appears connected in a photograph. Note whether the chiller, its starter or drive, and any accessories are included, and identify adjacent equipment that is excluded. If a control panel serves multiple machines, or a pump supports several process loops, do not imply it is part of the chiller sale unless the authorized owner has decided it can be transferred. The final scope should be agreed before removal planning.
Identify the centrifugal machine accurately
A centrifugal machine uses an impeller-driven compressor. Record the full unit model and the compressor and motor arrangement: packages that look alike from the outside may differ substantially in controls, drive, and internal condition. If the information is available from existing records or visible identification plates, include the manufacturer, model, serial number, and stated capacity. Do not open panels or energize equipment to find details; a clear photograph of an accessible plate or existing documentation may be enough to begin a review.
Capacity and transport weight answer different questions. Tonnage describes cooling capacity, not how heavy or difficult the assembly is to move. A high-capacity package may have a different configuration from another chiller of similar tonnage, while shells, motors, starters, and attached components affect the handling plan. Share known dimensions or weight information if already documented, but do not estimate lifting requirements from capacity alone.
Photographs that help establish scope and access
Useful views include the shell ends, motor, starter or drive, overall package, identification plate, and any visible lifting points. Also photograph the route around the unit where it can be done safely, along with doors, overhead obstructions, turns, and the opening through which removal may be considered. A large assembled package can require careful clearance measurements. Do not assume it can leave through the same opening a technician uses to enter.
Measurements and photos are for evaluating the proposed removal, not instructions to move or dismantle the chiller. If dimensions, weight, or lifting-point information are unknown, say so. The removal approach depends on the actual equipment and site conditions and can be worked out after the purchase scope and access are discussed.
Refrigerant is not process fluid
Refrigerant contained in the chiller circuit is distinct from water or another process fluid that may circulate through the chiller’s heat exchangers and connected piping. When describing the equipment, report what is known about each separately; do not assume that a drained process loop means the refrigerant circuit is empty. You do not need to test, start, repair, drain, open, cut, or dismantle the unit to request an offer, and should not vent refrigerant.
After an agreed purchase, South Carolina Chiller Buyers handles necessary refrigerant recovery through appropriately qualified personnel, along with disconnects, crane and rigging, loading, hauling, and freight. Freight is covered. The owner or authorized site representative still needs to grant permission and coordinate access. Site-specific access conditions and the agreed scope inform the removal plan.
When a sale may suit the situation
Consider a hypothetical facility replacing one centrifugal chiller while keeping the rest of its plant equipment: it could identify the chiller as the sale item and list the cooling tower, common pumps, and shared controls as excluded. In another conditional example, a stored spare may be offered even if its operating condition has not been verified. In either case, describe what is known and what remains uncertain rather than commissioning work solely to prepare a request.
Payment is upfront under the agreed purchase. No specific price or removal date can be promised before the equipment and terms are reviewed. A useful request in Duncan will distinguish the machine from nearby assets, provide its model and configuration where available, and explain the access constraints that may affect removal.
Prepare a clear request
- Provide the unit identity, known capacity, compressor and motor arrangement, and available condition records.
- State exactly which chiller components are included and which connected equipment must stay.
- Share safe photographs and known access or clearance details; identify missing information plainly.
With that scope, South Carolina Chiller Buyers can consider your centrifugal chiller in Duncan without requiring the seller to ship, test, or prepare it. Any offer and schedule remain subject to review and mutual agreement.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.