BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
South Carolina service area

Sell a Used Chiller in Clover, SC

We buy used and surplus industrial chillers in Clover, with upfront payment and buyer-managed removal.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Used Chiller in Clover, South Carolina

If you are searching for a “chiller buyer near me” and your equipment is in Clover, South Carolina, South Carolina Chiller Buyers can discuss a direct purchase. We buy used and surplus chillers; we do not sell replacement equipment. A unit may be in a closed factory, an occupied commercial property, a campus, a power plant, or a data center. Describe its actual setting and confirm who has authority to sell it.

We consider chillers of every capacity, including units below 20 tons. Chillers in the 20-to-2,000-plus-ton range are common, but size alone does not determine whether we can make an offer. We consider all brands and all refrigerants. Payment is upfront after an agreed purchase, with the offer and removal schedule based on the equipment and the agreement.

Cooling Capacity Is Not Shipping Weight

A chiller’s nominal tonnage describes its rated cooling capacity, not how much the machine weighs. One refrigeration ton represents a rate of cooling; it is not a measure of the unit’s mass. A listing that says “100 tons,” for example, does not tell a rigger whether the machine weighs a few thousand pounds or substantially more. Weight depends on the design, frame, heat exchangers, compressor arrangement, casing, and other components.

For removal planning, documented equipment weight is more useful than tonnage. Look for a manufacturer’s data plate, drawings, a manual, or prior shipping records if they are readily available. Do not guess from cooling capacity or a similar-looking model. If the documented figure is missing or uncertain, say so when discussing the unit; do not try to weigh, open, or dismantle it to obtain a number.

Describe the Particular Unit or Group

A Clover sale could involve one packaged chiller or several machines in a central plant. Identify which unit or units are offered, whether each is air-cooled or water-cooled, and what accessories are included or should remain at the site. Useful information may include the manufacturer, model, serial number, nameplate capacity, general condition, and available documentation. Share only information you can obtain safely without energizing or opening equipment.

Clarify whether a stated weight applies to the complete chiller, a shipping configuration, or a component. A value for a bare machine may exclude items such as a skid, attached accessories, or other materials. Similarly, do not assume that process-fluid piping or site equipment is part of the sale simply because it is near the chiller. State what the buyer is being asked to purchase so the equipment and removal scope can be reviewed accurately.

Refrigerant and Process Fluid Are Different

Refrigerant is part of the chiller’s refrigeration circuit. Process fluid, such as water or a water-based mixture, may circulate through the building or industrial system to carry heat. These are distinct materials in distinct parts of the installation; a description of one does not establish the condition or contents of the other. Do not drain, vent, cut, or disconnect either system to prepare for an offer.

You do not need to test, start, repair, or prepare the chiller to request a purchase offer. If operating condition is unknown, say that it is unknown rather than attempting a startup. After an agreed purchase, South Carolina Chiller Buyers handles necessary refrigerant recovery through appropriately qualified personnel as part of the removal process.

Access, Rigging, and Removal Responsibilities

Once a purchase is agreed, the buyer handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to hire a hauler or arrange shipment. However, the authorized owner or site representative must grant permission and coordinate access, including applicable site procedures and practical access details.

Transport planning depends on more than rated tons. Documented weight, the machine’s dimensions, its location, the route out of the building, and available lifting access can all matter. A high-capacity chiller is not automatically the heaviest unit, and a smaller-capacity machine is not necessarily easy to move. Share known constraints—such as restricted access or an occupied area—so the removal plan can be discussed before a schedule is set.

Information That Helps Start a Review

  • Identify the exact chiller or group being offered and its location within the Clover site.
  • Provide available make, model, serial number, capacity, cooling type, and refrigerant information.
  • Share documented weight and dimensions if available, noting whether they describe the complete unit.
  • Explain what accessories are included, what should remain, and who is authorized to approve access and sale.

Request an Offer Without Preparing the Machine

For a chiller in Clover, provide the available equipment details and describe the site conditions honestly, including any unknowns. Do not energize, open, drain, vent, cut, or dismantle the equipment for the inquiry. South Carolina Chiller Buyers will review the information and discuss whether a direct purchase is possible. Any offer and removal timing depend on the specific equipment and the final agreement; neither a price nor a date should be assumed in advance.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote