Sell a Surplus Air-Cooled Chiller in Cheraw, SC
We buy used air-cooled chiller equipment in Cheraw and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Air-Cooled Chiller in Cheraw, SC
If you have a surplus air-cooled chiller in Cheraw, South Carolina, South Carolina Chiller Buyers is a direct buyer—not a seller of replacement equipment. We consider air-cooled units across a wide range of sizes, including equipment under 20 tons; 20 to 2,000+ tons is a common range, not a minimum. We also consider all brands and refrigerants. An older label, incomplete records, or a unit that is no longer in service does not by itself determine whether it is worth discussing.
For an initial review, share what you can identify without energizing, opening, draining, venting, cutting, or dismantling the equipment. Clear photographs and records can help us understand the chiller and plan a possible removal. You do not need to test, start, repair, or prepare the unit to request an offer.
Read the nameplate carefully—and record what is uncertain
Air-cooled chillers reject heat through outdoor coils and fans rather than relying on a conventional cooling-tower loop. The nameplate may show the manufacturer, model, serial number, electrical information, refrigerant, and rated capacity. On an older machine, however, the label may be faded, damaged, missing, or difficult to reach safely. Report what is legible, and mark anything you cannot confirm as unknown instead of filling in a likely answer.
Capacity and transport weight are different facts. A tonnage figure describes cooling capacity; it does not tell a removal crew how heavy the complete machine is or how it can be lifted. If the shipping or operating weight is not documented, say so. Photos of the whole unit, visible fan and coil condition, and compressor count where visible can provide useful context, but they are not substitutes for a verified weight or a safe lifting assessment.
Use retrofit records as clues, not proof
Service folders may contain replacement-component notes, refrigerant conversions, or older labels that no longer match the equipment as it stands. A retrofit record can help explain what was changed, when the work was recorded, and which refrigerant may have been used. It does not necessarily establish the unit’s current configuration. Keep original labels and paperwork together where possible, and share discrepancies—for example, if a service note lists one refrigerant while the visible nameplate lists another.
Do not guess the refrigerant from the chiller’s age, brand, color, or a handwritten note. The refrigerant inside the circuit is distinct from any process fluid used by the connected system. If records do not settle the question, report that the refrigerant is unconfirmed. Appropriate, qualified personnel handle any necessary refrigerant recovery after an agreed purchase; the seller should not vent or attempt to remove refrigerant.
Describe the installation and the route out
Tell us whether your air-cooled chiller in Cheraw is on a roof, at grade on a pad, or mounted on a raised frame. A rooftop or elevated installation may need a lift plan and a protected ground area. For a unit at grade, the path to the truck still matters: gates, narrow turns, overhead obstructions, nearby equipment, and limited staging space can affect how removal is arranged.
Photos taken from safe, accessible positions can show the unit’s surroundings, available clearance, and likely access route. Include a wider view as well as closer views of the chiller. Do not climb onto equipment or enter a restricted area to get a picture. If access conditions are uncertain, say so rather than assuming that a route is clear.
Details that help us review a surplus unit
- Manufacturer, model, serial number, and readable nameplate details—or a note that a label is unreadable.
- Known tonnage and any documented weight, keeping capacity separate from lifting weight.
- Visible fan and coil condition, compressor count where visible, and whether the unit is on a roof, pad, or raised frame.
- Available retrofit, service, and refrigerant records, including any conflicting information.
- Photos of the surrounding clearance, access route, gates, and overhead obstructions.
These details support an informed review; they are not a request to inspect internal parts or perform a test. For example, if a nameplate is unreadable but service records and exterior photos are available, submit those materials and clearly identify the missing information. If a roof unit has no documented weight, note that too. The eventual offer and removal schedule depend on the equipment, access, and agreed terms.
What happens after an offer is agreed
Payment is upfront. After a purchase is agreed, South Carolina Chiller Buyers handles the disconnects, any necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to hire a carrier or ship the chiller.
The authorized owner or site representative must still give permission for the sale and coordinate access for the planned work. That person can help confirm site restrictions, access arrangements, and the appropriate contact for removal. A roof installation, for instance, may call for coordination about a lift and the area below; a ground-level unit may still require a clear route and suitable access. Do not assume a particular price or removal date before the equipment and arrangements have been reviewed.
Request a review without preparing the chiller
Whether the unit is obsolete, surplus after a change in cooling needs, or simply no longer wanted, begin with the information already available. Share the location in Cheraw, photographs, legible label details, and any retrofit or service records. Be direct about what is known, what conflicts, and what remains uncertain. You do not have to start, repair, clean, or dismantle the machine to ask about an offer.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.