BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Centrifugal Chiller in Marion, SC

We buy used centrifugal chiller equipment in Marion and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Centrifugal Chiller in Marion, SC

South Carolina Chiller Buyers purchases surplus centrifugal chillers in Marion and throughout South Carolina. We are a direct buyer, not a seller of replacement equipment. If a centrifugal machine is no longer needed, is being displaced by a plant change, or is part of an upcoming site clearance, you can request an offer without first putting the unit into operating condition.

We consider chillers of every tonnage, including units below 20 tons. Chillers from 20 to 2,000+ tons are common, but capacity alone does not determine whether a particular machine is suitable for purchase. We consider all brands and refrigerants. The equipment’s identity, condition, configuration, access, and the details of a proposed removal all matter.

Start with identification, not a startup

A centrifugal chiller uses an impeller-driven compressor. Record the full unit model and, if you can do so safely from accessible nameplates or existing records, the compressor and motor arrangement. Machines that look similar from the outside may differ substantially in controls, drive, and internal condition. Those distinctions help us assess what is actually on site rather than relying on appearance or a capacity label alone.

Share the available information through existing documentation, readable nameplate photographs, and a description from someone familiar with the equipment. You do not need to test, start, repair, open, drain, vent, cut, or dismantle the chiller to request an offer. If records are incomplete, provide what is known and identify what remains uncertain; do not guess at a model or condition.

Show the package and its surroundings

Photographs can help establish the machine’s configuration and the practical questions that affect removal. If accessible without disturbing equipment, photograph the shell ends, motor, starter or drive, and any visible lifting points. Include enough surrounding space to understand nearby obstructions and the route toward an exit. Do not climb onto the unit or enter a restricted area to obtain a picture.

A large assembled package may need careful clearance planning. Measure accessible doorways, corridors, turns, overhead restrictions, and the intended exit route when site personnel can do so safely. Do not assume the chiller can pass through the same opening a technician uses to enter. A machine that appears to fit in a room may still require a different rigging approach because of its dimensions, configuration, or the available path out.

Capacity is not transport weight

Tonnage describes cooling capacity; it is not a measure of shipping weight, lifting demand, or the space needed to move a unit. A high-capacity chiller may have a different assembled footprint and removal complexity than another machine with a similar rating. For an initial review, provide known dimensions and weight from reliable equipment records, if available, and clearly distinguish documented figures from estimates. The buyer can then consider those details alongside access and the equipment’s condition.

Refrigerant and process fluid are also different. Refrigerant belongs to the chiller’s refrigeration circuit, while process or chilled water may be present in connected piping or equipment. Do not open or drain either system to prepare for a sale. After an agreed purchase, South Carolina Chiller Buyers handles necessary refrigerant recovery through appropriately qualified personnel as part of the removal arrangements.

From inquiry to an agreed removal

The sequence is straightforward: provide the equipment details and available photos, discuss condition and site access, and allow the buyer to assess whether to make an offer. If both sides agree to proceed, payment is upfront and the parties coordinate the removal plan. The offer and pickup schedule depend on the specific chiller, access, and terms agreed; neither a price nor a removal date can be assumed before that review.

  • Identify the machine with its full model, known capacity, brand, and compressor and motor arrangement.
  • Share available records and safe, useful photographs, noting missing or uncertain details.
  • Describe the route out, known clearance limits, and any access or authorization requirements.
  • Review the offer and removal terms; proceed only after an authorized owner or site representative approves the plan.

Removal is handled by the buyer

Once a purchase is agreed, the buyer handles disconnects, necessary refrigerant recovery by appropriately qualified personnel, crane and rigging requirements, loading, hauling, and freight. Freight is covered. Sellers do not need to arrange shipment or hire a separate crew for those removal tasks. The site still needs an authorized owner or representative to grant permission and coordinate access, including any applicable site procedures and practical entry arrangements.

If the chiller is idle but not yet cleared for removal, or if its condition is not fully known, that does not by itself prevent an inquiry. Explain what is known, what is uncertain, and whether the equipment is assembled or altered. Clear, accurate information helps determine whether a purchase can be agreed and what removal planning will be appropriate for your centrifugal chiller in Marion.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote