Sell a Surplus Water-Cooled Chiller in Goose Creek, SC
We buy used water-cooled chiller equipment in Goose Creek and handle the agreed disconnect, rigging, and freight.
We buy chillers. We don’t sell them.
Your chiller.
Our logistics.
Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.
From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.
See how it works
All types & sizes
Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.
We handle the logistics
We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.
Made for sellers
Send the details and nameplate photos to start a conversation about your chiller.
Three steps.
One less chiller.
- 01
Send the details
Share what you know, along with photos of the unit and nameplate.
- 02
Get a quote
We’ll review your equipment and discuss an offer with you.
- 03
Leave the logistics to us
We coordinate removal and freight for the chillers we purchase.
Sell a Surplus Water-Cooled Chiller in Goose Creek, SC
If a facility in Goose Creek, South Carolina, has several similar chillers, deciding which one is surplus takes more than noting its make or approximate capacity. South Carolina Chiller Buyers purchases used water-cooled chillers directly; we do not sell replacement equipment. We consider every tonnage, including units below 20 tons, with 20 to 2,000+ tons a common range. All brands and refrigerants are considered.
Start by identifying the specific machine under consideration. A clear equipment record helps distinguish it from neighboring chillers and supports an offer based on the right asset, rather than on a broad description of the plant.
Identify the Individual Chiller
When units are similar, record each chiller’s location and its nameplate information, such as manufacturer, model, serial number, and stated capacity, if these details are safely visible. Note a practical identifier used on site, such as a room designation or existing equipment label. Do not assume that two units with matching model numbers have the same condition, operating history, or removal requirements.
If records are incomplete, use photographs taken from safe, accessible positions to show the overall machine, nameplate, and visible connections. You do not need to test or start the unit to request an offer. Do not open, energize, drain, vent, cut, or dismantle equipment to gather information.
Map Both Water Circuits
A water-cooled chiller normally connects to two separate systems: the chilled-water loop serving the building or process, and the condenser-water loop associated with heat rejection. Identify both sets of connections in your notes. Also clarify whether the cooling tower, pumps, controls, and related equipment are included in the proposed sale or will remain with the property. A chiller purchase does not automatically include those connected assets.
Photographs of accessible valves, insulated pipe runs, and nearby equipment can help show where the chiller’s connections meet shared systems. This distinction matters when other chillers will remain in service. For example, if a facility conditionally plans to keep a neighboring machine operating, the removal scope must account for shared piping and any cooling equipment that continues to serve it.
Describe the Removal Boundary
For water-cooled chiller removal, the disconnection plan must distinguish the unit from piping and cooling equipment that stay in use. Photos of the valves, insulation, pipe routes, and machinery-room exit help establish the likely scope. Include a view of access constraints, such as tight turns or limited clearance, when they are visible. These details do not replace an on-site removal plan, but they help the buyer understand what may affect handling and scheduling.
Capacity and transport weight are different considerations. Tonnage describes cooling capacity; it does not tell you how heavy the chiller is or whether it can pass through a particular exit. If weight or dimensions are available in existing records, share them. Do not attempt to move or dismantle the machine to estimate either.
Share Useful Information for an Offer
For a first review, provide the chiller’s identifying details, its known condition, whether it is surplus or out of service, and what equipment is included. Mention known access or shared-system concerns, and send safe, current photographs when available. If several units are candidates, label each set of information so the offer can be tied to the correct chiller.
- Identify the specific unit by its visible label, location, and available nameplate details.
- List what is included, including any tower, pumps, or controls, and what remains on site.
- Show accessible water connections and the route from the machinery room to the exit.
- Describe known condition without starting, opening, draining, or altering the equipment.
These details help distinguish the common equipment type from the particular chiller being sold. They also help surface uncertainties early, such as unclear ownership of connected equipment or a shared pipe run whose role is not documented.
Purchase, Payment, and Removal
After an agreed purchase, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The seller does not need to test, start, repair, prepare, hire a carrier, or ship the chiller to request an offer. Payment is upfront.
The authorized owner or site representative must still provide permission and coordinate access. Any site-specific access arrangements should be discussed before removal. The offer and removal schedule depend on the equipment and the agreement, so neither a price nor a particular date can be guaranteed in advance.
When Several Units Are Potentially Surplus
If more than one chiller may be available, assess each one separately rather than treating the plant’s total capacity as a single asset. For instance, if an owner conditionally intends to retire one machine while retaining others, identify which unit is being sold and which connected systems must remain available to the facility. A unit’s capacity, refrigerant, condition, included components, and removal access all inform the review.
Water in the chiller loops is process or building-system fluid; it is not refrigerant. Avoid changing either system to prepare for an offer. Send the information already available, clarify what is included, and let the removal scope be established with the authorized representative before work proceeds.
Ready to move
your chiller?
Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.
Request a quote.
Fill out what you can and we’ll be in touch.