BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Centrifugal Chiller in Camden, SC

We buy used centrifugal chiller equipment in Camden and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Centrifugal Chiller in Camden, SC

South Carolina Chiller Buyers purchases surplus centrifugal chillers in Camden and throughout South Carolina. We are a direct buyer, not a seller of replacement equipment. If a centrifugal machine is no longer needed, is being held in storage, or has become excess after a project change, you can request an offer without first testing, starting, repairing, or preparing the unit.

We consider chillers of all tonnages, including units below 20 tons; 20 to 2,000-plus tons is a common range. We also consider all brands and refrigerants. An offer and removal plan depend on the particular equipment and the purchase agreement, so neither a price nor a collection date can be assumed in advance.

Identify the compressor and the complete package

A centrifugal chiller uses an impeller-driven compressor. For an initial assessment, record the full unit model and any available serial information, along with the compressor and motor arrangement. Packages that look alike from the outside can differ substantially in controls, drive equipment, and internal condition. Clear identification helps distinguish your machine from another unit in the same product family.

If the chiller is stored with its controller or starter separated from the main package, note that arrangement and identify the associated components as best you can from existing labels or records. Do not reconnect equipment to confirm a match. Photos of labels and the separate items can help show what is present without disturbing the equipment.

Document what can be seen safely

Useful photographs include the shell ends, motor, starter or drive, overall package, and any visible lifting points. Include the separate controller or starter in the same set if it is stored elsewhere, and indicate which items you believe belong together. Existing nameplates, maintenance records, or inventory documents may provide helpful context, but you do not need to create new documentation by opening or dismantling the machine.

For a large assembled package, measure available clearances and describe the route out of the building or storage area, if known. Do not assume the chiller can pass through the opening used by a technician; access for inspection and clearance for moving a complete machine are different questions. If measurements are uncertain, say so rather than moving equipment to get them.

Capacity does not tell the whole moving story

Cooling capacity, often stated in tons, is not the same as transport weight. A capacity label helps characterize the chiller, but it does not establish the weight or dimensions of the assembled package, nor whether a particular exit route is workable. Available records, visible configuration, and access information all help shape a practical removal assessment.

Similarly, a centrifugal chiller may be associated with both refrigerant and a separate process or chilled-water circuit. These are not interchangeable fluids. Do not drain, vent, cut, open, or dismantle the unit to prepare it for review. If refrigerant recovery is necessary after a purchase, it is handled by appropriately qualified personnel as part of the agreed removal work.

Request an offer without commissioning the machine

A stored chiller does not have to be running to request an offer. You are not required to energize it, arrange a test, hire a repair contractor, or make it ready for shipment. If its operating condition is unknown, state that plainly. Information about the model, configuration, visible condition, included components, and access can still support an initial conversation.

For example, if a controller is stored separately and its relationship to the chiller is documented, share that information and the available photographs. If the controller’s association is uncertain, identify it as uncertain. In either case, avoid reconnecting or opening electrical equipment merely to verify what it is.

Removal follows the agreed purchase

After a purchase is agreed, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. The authorized owner or site representative must still give permission for the work and coordinate access, including any site-specific entry procedures or scheduling constraints.

Removal timing depends on the equipment, site access, and the terms agreed with the buyer. Share known clearance limits and whether the unit is assembled or stored in separate sections so the removal plan can be considered before a schedule is set. Do not move, disconnect, or dismantle the chiller yourself in anticipation of pickup.

Information to include with your inquiry

  • Full unit model and available serial information
  • Compressor and motor arrangement, if known
  • Photos of the shell ends, motor, starter or drive, and lifting points
  • Details about a separate controller or starter and whether its connection is confirmed
  • Approximate dimensions, known access clearances, and any uncertainty about the exit route
  • Available records on condition, refrigerant, or configuration, without operating or opening the machine

These details help evaluate your centrifugal chiller in Camden without asking you to prepare it for removal. South Carolina Chiller Buyers can consider the equipment as it stands and discuss an offer and removal arrangement based on the unit and the agreement.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote