BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Air-Cooled Chiller in Blythewood, SC

We buy used air-cooled chiller equipment in Blythewood and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Air-Cooled Chiller in Blythewood, SC

South Carolina Chiller Buyers purchases surplus air-cooled chillers in Blythewood and elsewhere in South Carolina. We are a direct buyer, not a seller of replacement equipment. If a unit is no longer needed, is part of a facility change, or is being considered for removal, you can request an offer without first making it operational or arranging its transport.

We consider all tonnages, including equipment below 20 tons; 20 to 2,000+ tons is a common range. We also consider all brands and refrigerants. An offer and removal schedule depend on the particular chiller, its condition and configuration, site access, and the purchase agreement. No specific price or removal date can be assumed before those details are reviewed.

What makes air-cooled equipment different

An air-cooled chiller rejects heat through outdoor coils and fans rather than relying on a conventional cooling-tower loop. That distinction can help identify the equipment, but it does not by itself establish its value or ease of removal. Share the make and model if available, approximate capacity, visible condition, and any records you already have. Do not energize the unit or open panels to gather information.

Capacity and transport weight are separate considerations. Tonnage describes cooling capacity; it does not tell a crew how heavy the complete unit is, how it can be lifted, or whether it will clear the route to a truck. A large-capacity machine may have a different footprint and lifting arrangement from another unit of similar tonnage. Available weight, dimensional, and rigging information can help assess handling, but the site and unit still need to be considered together.

Describe the installation and surroundings

Record whether your air-cooled chiller is on a roof, at grade on a pad, or mounted on a raised frame. If it is safe to do so from accessible areas, photos of the complete unit, its surroundings, and the route out are useful. Include outdoor coil and fan condition, the number of compressors where visible, and any clearly observable damage. These details help distinguish a straightforward ground-level removal from one that may need more planning.

For a rooftop or elevated installation, a lift plan and a protected area on the ground may be required. For a unit at grade, the route to the truck still matters: note gates, tight turns, overhead obstructions, changes in level, and available clearance. If a chiller sits in or near a mechanical room with limited exit clearance, say so early. Depending on the opening, surrounding equipment, and agreed removal method, that constraint may affect whether the unit can pass intact and how access must be coordinated. Do not begin cutting, dismantling, or moving it to improve access.

Useful details to include with an offer request

  • Brand, model, serial number, and approximate tonnage, if readily available.
  • Whether the chiller is rooftop, ground-level, or elevated, plus photos of the unit and exit route.
  • Visible fan, coil, and compressor condition, along with known operating or service information.
  • Access limitations such as restricted clearance, gates, overhead lines or structures, and loading-area constraints.
  • Whether you are the authorized owner or site representative and who can coordinate access.

These are helpful details, not a checklist of work you must complete before contacting us. You do not need to test, start, repair, or prepare the chiller to request an offer. Do not open the equipment, drain process fluid, or vent refrigerant to document its condition.

Refrigerant and process fluid are not the same

An air-cooled chiller contains refrigerant in its refrigeration circuit; the system it serves may also circulate a separate process fluid. Those are different materials in different parts of the installation. If you know the refrigerant type or have records about the process loop, you may share that information, but you are not expected to release either substance or disconnect the equipment. After an agreed purchase, South Carolina Chiller Buyers handles necessary refrigerant recovery through appropriately qualified personnel. Do not vent refrigerant or drain fluids as part of requesting an offer.

Access, removal, and payment

After the purchase is agreed, the buyer handles disconnects, necessary qualified refrigerant recovery, crane and rigging, loading, hauling, and freight; freight is covered. The authorized owner or site representative still needs to grant permission and coordinate access, timing, site rules, and any required escort. For example, if a unit is behind a controlled gate or occupies a shared loading area, the representative should identify the access process and any scheduling limits before removal is arranged.

Payment is upfront under the agreed transaction. The timing of payment and removal is tied to the purchase agreement and the practical requirements of the equipment and site; neither a fixed offer nor a particular pickup date is promised in advance. If the unit is surplus and you can provide basic identification and access information, request an offer for your air-cooled chiller in Blythewood, South Carolina.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote