BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Water-Cooled Chiller in Batesburg-Leesville, SC

We buy used water-cooled chiller equipment in Batesburg-Leesville and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Water-Cooled Chiller in Batesburg-Leesville, SC

If you are considering selling a surplus water-cooled chiller in Batesburg-Leesville, South Carolina, start by defining exactly what is included in the sale. The chiller may be one part of a larger cooling system, and the cooling tower, pumps, controls, piping, or other equipment may need to remain on site. South Carolina Chiller Buyers is a direct buyer of used chillers, not a seller of replacement equipment. We consider water-cooled units of all tonnages, all brands, and all refrigerants.

Draw the boundary around the chiller

A water-cooled chiller normally connects to two separate water circuits: a chilled-water loop serving the building or process, and a condenser-water loop that carries heat away, often through a cooling tower. When requesting an offer, identify both sets of connections and say which related equipment is included or excluded. For example, a chiller may be surplus while its pumps and tower are still needed to operate another unit. In that case, make clear that only the chiller is being considered.

Also note whether controls are dedicated to the chiller or shared with equipment that will stay. If you are unsure where a system boundary lies, describe what you know and provide photographs for review. Do not disconnect, open, drain, cut, or dismantle anything to establish the boundary.

Photos and records that clarify scope

Useful photos can show the chiller’s overall condition, identification plate, visible connections, surrounding clearance, and the route from the machinery room to an exterior loading point. Images of valves, insulation, pipe runs, and the machinery-room exit can help explain how the chiller is separated from shared piping and what access removal may require. Keep the view broad enough to show nearby equipment that must remain in service.

Available nameplate details, maintenance records, and notes about known condition can also help. You do not need to test or start the machine, repair it, or prepare it for an offer. Do not energize equipment for inspection or attempt to confirm operation. A sale discussion can begin with the information and visual access you already have.

Capacity is not shipping weight

Chiller tonnage describes cooling capacity; it does not tell a buyer how much the unit weighs or whether it can pass through a particular doorway. Transport and rigging planning depend on the machine’s dimensions, weight information when available, lifting points, route, overhead clearance, and site access. A 100-ton chiller, for instance, is not automatically a certain weight or an easy fit for a given exit. Treat capacity and removal logistics as separate questions.

We consider equipment below 20 tons as well as larger machines; 20 to 2,000-plus tons is a common range, not a limit. The offer and removal schedule depend on the specific chiller, its condition and scope, access, and the agreement reached.

What stays, what goes, and who coordinates

Before agreeing to a purchase, identify the chiller being sold and list any tower, pumps, controls, piping, or other assets that are excluded. If shared piping or controls serve equipment that remains active, note that relationship so the removal plan can account for it. The agreed scope should distinguish the machine from property systems that remain in use; it should not assume that every connected component is part of the sale.

The authorized owner or site representative must provide permission and coordinate access. After an agreed purchase, South Carolina Chiller Buyers handles the removal work: disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling, and freight. Freight is covered. Sellers do not need to arrange shipping or hire a removal crew.

Refrigerant and process water are different

Refrigerant circulates within the chiller’s refrigeration circuit; chilled water and condenser water move through separate connected loops. Do not vent refrigerant or drain either water circuit to prepare the unit. Any necessary refrigerant recovery is handled as part of removal by appropriately qualified personnel. If the chiller contains process fluid or has unusual connections, mention that when describing the equipment so the removal scope can be considered accurately.

Request an offer without preparing the machine

Share the location in Batesburg-Leesville, available equipment details, photographs, and a clear account of what is included versus staying on site. South Carolina Chiller Buyers provides upfront payment for an agreed purchase. No testing, startup, repairs, or pre-sale dismantling are required to request an offer. Once the equipment and scope are reviewed, the proposed terms and removal timing can be discussed without assuming a particular price or date in advance.

  • Identify the chiller and its available brand, model, and capacity information.
  • Describe chilled-water and condenser-water connections, plus equipment that will remain.
  • Share photos of the unit, shared piping, valves, access route, and machinery-room exit.
  • Confirm who is authorized to approve the sale and coordinate site access.
LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote