BUYING ACROSS SOUTH CAROLINA
Owner-supplied photograph of industrial chiller equipment
Local chiller type

Sell a Surplus Centrifugal Chiller in Travelers Rest, SC

We buy used centrifugal chiller equipment in Travelers Rest and handle the agreed disconnect, rigging, and freight.

We buy chillers. We don’t sell them.

REAL EQUIPMENT. REAL PHOTOS.SC / CHILLER BUYERS
01Payments Upfront
02No Testing
03We Cover All Freight
04All Tonnages Bought
THE STRAIGHTFORWARD WAY TO SELL

Your chiller.
Our logistics.

Have a surplus or decommissioned chiller? We’re the buyer—here to make moving it straightforward.

From a single unit to equipment from a larger facility, tell us what you have. We buy industrial and commercial chillers across South Carolina and coordinate the work to get them moved.

See how it works
Owner-supplied photograph of a commercial chiller
01 / EQUIPMENTBuilt for the big stuff.
01 /

All types & sizes

Air-cooled or water-cooled, centrifugal, screw or scroll. Tell us what you have.

02 /

We handle the logistics

We coordinate rigging, refrigerant recovery, loading and freight for the equipment we buy.

03 /

Made for sellers

Send the details and nameplate photos to start a conversation about your chiller.

HOW IT WORKS

Three steps.
One less chiller.

  1. 01

    Send the details

    Share what you know, along with photos of the unit and nameplate.

  2. 02

    Get a quote

    We’ll review your equipment and discuss an offer with you.

  3. 03

    Leave the logistics to us

    We coordinate removal and freight for the chillers we purchase.

Sell a Surplus Centrifugal Chiller in Travelers Rest, SC

South Carolina Chiller Buyers purchases surplus centrifugal chillers in Travelers Rest and throughout South Carolina. We are a direct buyer, not a seller of replacement equipment. We consider centrifugal machines of all tonnages, including units below 20 tons; 20 to 2,000+ tons is a common range. Brand and refrigerant type do not by themselves rule out a unit. The equipment’s configuration, condition, access and removal requirements all help determine whether we can make an offer.

If a chiller is no longer needed, an upcoming space change or equipment replacement may be a reason to seek an offer before arranging disposal. You do not need to test, start, repair or prepare the machine to ask us to review it. Share the information and photographs already available, and we can discuss the unit and potential next steps without asking you to operate or dismantle it.

Cooling capacity is not transport weight

A centrifugal chiller’s nominal capacity, stated in tons, describes its rated cooling output; it does not indicate how much the assembled equipment weighs. Two machines with similar tonnage can have different physical weights because their shell dimensions, motor and compressor arrangements, starters or drives, and included components may differ. Conversely, a unit’s weight alone does not establish its cooling capacity or market value.

For an offer and removal review, keep these details distinct. Provide the rated tonnage from a record or nameplate if available, and share a documented shipping or operating weight separately. Make clear whether a stated weight refers to the chiller alone, a larger assembly, or a package that includes other equipment. If the weight is unknown, say so rather than estimating from capacity. We can assess available information and identify what still needs clarification.

Identify the specific centrifugal package

A centrifugal machine uses an impeller-driven compressor, but packages that look similar from the outside can differ substantially in controls, drive and internal condition. Record the full unit model and, if visible in existing records or photographs, the compressor and motor arrangement. A model number or equipment schedule can be more useful than a general description such as “large centrifugal chiller.” Do not open panels or access internal components to gather details.

Photographs can help show the shell ends, motor, starter or drive, and any visible lifting points. Include overall views that establish how the assembled unit sits in the space, plus close views of labels that are already accessible. If parts have been removed previously, or the starter or drive is separate from the chiller, note that in your description. These are practical distinctions, not reasons to alter the equipment before requesting an offer.

Check the removal route before assuming clearance

Capacity and weight are only part of a removal plan. A large assembled package may require careful clearance measurements, including the route from its installed position to an exit and the dimensions of any doorway, corridor or overhead restriction. Do not assume a chiller can leave through the same opening a technician uses to enter. If measurements already exist, share them; if not, explain what is known about access and what remains uncertain.

For example, if a machine appears to fit through a service opening but the route includes a turn or a low overhead, the opening alone may not establish that removal is workable. That is a conditional planning issue, not a conclusion about a particular Travelers Rest property. South Carolina Chiller Buyers can consider access details alongside the unit information and discuss whether further coordination is needed before an agreement.

What to include when requesting an offer

Send what you can confirm from existing documentation or safe, accessible views. You do not have to produce a perfect equipment file to begin. In particular, distinguish known facts from estimates, and identify missing information plainly. Useful starting details include:

  • Full unit model, brand, nominal tonnage and any documented equipment weight, with the source of each figure if known.
  • Compressor and motor arrangement, along with visible starter or drive information.
  • Refrigerant type if listed in existing records or on an accessible label; all refrigerants are considered.
  • Photographs of shell ends, motor, starter or drive, visible lifting points and the surrounding removal route.
  • Known access limits, whether the unit is assembled, and whether included components are stored separately.

A refrigerant is not the same as a process fluid. Refrigerant circulates within the chiller’s refrigeration system, while process fluid may be the water or other fluid cooled for an application. If the fluid arrangement is unclear, report only what you know from records; do not open, drain or vent the equipment.

Purchase, payment and removal responsibilities

If both sides agree on a purchase, payment is upfront. The offer and removal schedule depend on the equipment details and the terms agreed; neither a particular price nor a specific date can be promised before review and coordination. Once an agreement is in place, South Carolina Chiller Buyers handles disconnects, necessary refrigerant recovery through appropriately qualified personnel, crane and rigging, loading, hauling and freight. Freight is covered.

The authorized owner or site representative must still provide permission and coordinate access. That includes arranging an agreed time and making relevant site-access information available. You do not need to hire a carrier or ship the chiller yourself. Do not energize, open, drain, vent, cut or dismantle the unit to prepare it for removal.

Start with the records and access information you have

For your centrifugal chiller in Travelers Rest, the most helpful first step is to separate confirmed capacity from documented weight, then provide the model and available configuration details. Add clear photographs and explain any known clearance constraints. If a figure is unavailable or uncertain, identify it as such. We can review the information, discuss the equipment and access, and determine whether an offer and removal plan can be agreed without requiring you to test or repair the chiller.

LET’S TALK EQUIPMENT

Ready to move
your chiller?

Tell us what you know. If you’re unsure of a detail, leave it blank. Nameplate photos are a great place to start.

CALL OR TEXT(614) 715-3047
EMAIL PHOTOS & DETAILSsaleselectricalbuyers@gmail.com
Text Nameplate Photos Owner-supplied photograph of chiller equipment in a mechanical room
SELL YOUR EQUIPMENT

Request a quote.

Fill out what you can and we’ll be in touch.

Nameplate or equipment photos

Up to 3 images; 10 MB maximum combined. You can also text or email photos.

* Required. Please don’t include sensitive personal information. Requests and photos are processed by FormSubmit and sent to our email.

Request a Quote